298D, 298W
Vishay Sprague
www.vishay.com
Solid Tantalum Chip Capacitors
298D MICROTAN , 298W Extended Range MICROTAN ,
Leadframeless Molded
®
®
FEATURES
• Small sizes include 0603 and 0402 footprint
• Lead (Pb)-free L-shaped face-down terminations
• 8 mm tape and reel packaging available per
EIA-481 and reeling per IEC 60286-3
7" [178 mm] standard
• Mounting: surface mount
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40169
Capacitance Range:
298D: 0.33 μF to 220 μF
Operating Temperature:
298D: -55 °C to +125 °C
298W: 2.2 μF to 220 μF
Capacitance Tolerance: 20 ꢀ standard, 10 ꢀ available
Voltage Range: 2.5 VDC to 50 VDC
(above 85 °C, voltage derating is required)
298W: -55 °C to +125 °C
(above 40 °C, voltage derating is required)
ORDERING INFORMATION
298D
335
X0
010
M
2
T
TYPE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
CASE CODE
TERMINATION
REEL SIZE AND
PACKAGING
298D
298W
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
X0 = 20 %
X9 = 10 ꢀ
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage rating.
A decimal point is indicated
by an “R” (6R3 = 6.3 V).
See Ratings
and Case
Codes table
2 = 100 % tin
4 = gold plated
T = tape and reel
7" [178 mm] reel
Note
Preferred tolerance and reel sizes are in bold.
•
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating
DIMENSIONS in inches [millimeters]
Anode Polarity Bar
Cathode Termination
Anode Termination
C
W
H
L
P1
P2
P1
CASE CODE
L
W
H (MAX.)
P1
P2 (REF.)
C
0.039 + 0.008
0.020 + 0.008
0.024
[0.6]
0.01 0.004
0.02
0.015 0.004
K
[1.0 + 0.2]
[0.5 + 0.2]
[0.25 0.1]
[0.5]
[0.38 0.1]
0.063 0.008
[1.60 0.2]
0.033 0.008
[0.85 0.2]
0.020 0.004
[0.50 0.1]
0.024
[0.60]
0.024 0.004
[0.60 0.1]
0.035
[0.9]
0.035
[0.9]
0.062
[1.57]
0.047
[1.2]
M
S
R
P
Q
A
0.079 0.008
0.050 0.008
0.020 0.004
0.040
0.035 0.004]
[2.00 0.20]
[1.25 0.20]
[0.50 0.10]
[1.00]
[0.90 0.10]
0.081 0.006
[2.06 0.15]
0.094 0.004
[2.4 0.1]
0.053 0.006
[1.35 0.15]
0.057 0.004
[1.45 0.1]
0.020 0.004
[0.51 0.1]
0.020 0.004
[0.50 0.1]
0.035 0.004
[0.90 0.1]
0.035 0.004
[0.90 0.1]
0.043
[1.1]
0.057
[1.40]
0.126 0.008
0.063 0.008
0.039
0.031 0.004
0.063
0.047 0.004
[3.2 0.2]
[1.6 0.2]
[1.0]
[0.80 0.1]
[1.60]
[1.20 0.1]
0.126 0.008
[3.2 0.2]
0.063 0.008
[1.6 0.2]
0.071
[1.8]
0.031 0.004
[0.80 0.1]
0.063
[1.60]
0.047 0.004
[1.20 0.1]
Revision: 18-Jul-17
Document Number: 40065
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000