27CP Series
Unit:mm
○Assembly Instruction(2)
① Cut the cable as fig.1.
①
The cable length require for the cable assembly
L=L1+15+3
L1
15.0
3
Ferule
Ferule
② Insert the ferule between outer conductor and
sheath when the cable is 2.5C-2V.
②
③
Insert the ferule until ferule contacts with the
sheath when the cable is 1.5C-2V.
2.8
③ Pick the outer conductor and turn down to the
ferule. Cut the extra outer conductor along the
ferule. Cut the center conductor as fig.3.
Please be careful to not damage the center
conductor. Pre-solder the center conductor.
2.8
and insert the
center conductor into the body as fig.4.
Crimp the root of the body.
④ Insert the boot into the cable
④
⑤
Rear Insulator
⑤ Insert the rear insulator into the center
conductor.
Soldering
Cut the center conductor in 1.6mm and pre-
soldering.
Insert the contact and solder.
Front Insulator
⑥ Insert the front insulator into the contact and
twist in the interface.
⑥
Cover the heat-shrinkable tube and heat up.
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
5