5秒后页面跳转
25DMOW PDF预览

25DMOW

更新时间: 2024-11-17 02:52:19
品牌 Logo 应用领域
GAPTEC /
页数 文件大小 规格书
6页 3047K
描述
25W - Single Output - Wide Input - Isolated & Regulated

25DMOW 数据手册

 浏览型号25DMOW的Datasheet PDF文件第2页浏览型号25DMOW的Datasheet PDF文件第3页浏览型号25DMOW的Datasheet PDF文件第4页浏览型号25DMOW的Datasheet PDF文件第5页浏览型号25DMOW的Datasheet PDF文件第6页 
25DMOW_1.5 series  
25W - Single Output - Wide Input - Isolated & Regulated  
DC-DC Converter  
DC-DC Converter  
25 Watt  
Wide 2:1 input voltage range  
High efficiency up to 88%  
Short circuit protection (SCP)  
Isolation voltage: 1.5kVDC  
Over-current, over-voltage,  
over-temperature protection  
Input under-voltage lockout  
RoHS compliant  
Operating temperature range:  
The 25DMOW_1.5 series are isolated 25W DC/DC converters with 2:1  
input voltage. They feature efficiency up to 88%, 1500VDC isolation,  
operating temperature of -40°C to +85°C, input under-voltage protec-  
tion, output over-voltage, output over-current, output short circuit  
protection and meets IEC60950-1.  
-40°C to +85°C  
Fixed switching frequency  
Remote on/off negative logic  
International standard pin-out  
Monotonic startup into  
pre-biased loads  
Adjustable output voltage  
range  
IEC/UL/EN60950-1 approved  
They are widely applied in optical networking equipment, wireless base  
stations, microwave radio communications, telecom and data equip-  
ment applications.  
UL-60950-1 (E347551)  
Common specifications  
Short circuit protection:  
Cooling:  
Output specifications  
Hiccup, continuous, self-recovery  
Free air convection  
-40°C~+85°C  
Item  
Test condition  
Min  
Typ  
5
Max  
5.05  
Units  
V
Voltage set point  
25°C, Io=Io (max)  
4.95  
Operation temperature range:  
Storage temperature range:  
Storage humidity range:  
Thermal stability time:  
FIT:  
Line regulation*  
Vin(min to Vin(max)  
Io= Io(max),  
Vo=Vo(nom)  
0.1  
%Vo  
%Vo  
-55°C~+125°C  
90% MAX  
Load regulation*  
Voltage precision  
Vin=Vin(nom)  
0.125  
30mins  
Io=0 to Io (max)  
312.5; 109/MTBF  
At 50% load  
1
%Vo  
%Vo  
Vibration:  
IEC60068-2-6: 10~500Hz sweep, 0.75mm  
excursion, 10g acceleration, 10minutes  
in each 3 perpendicular directions  
Voltage adjust-  
ment range  
-20  
10  
Remote sense  
Vsense = Vout - Vload,  
sense connected at load  
10  
%Vo  
A
Shock:  
Safety:  
IEC 60068-2-27:200g acceleration, dura-  
tion 3ms, 6 drops in each 3 perpendicu-  
lar directions  
Current Limit  
5.5  
0
7.5  
Compliant to IEC60950-1, UL60950-1,  
EN60950-1 and GB4943  
External load  
capacitance  
Full resistive load,  
low ESR  
2200 µF  
Switching frequency:  
Transportation:  
450KHz TYP, fixed frequency  
ETS300019-1-2  
Temperature  
coefficient  
At all outputs  
200  
200  
ppm/°C  
Dynamic response 25%-50%-25%,50%-  
recovery time 75%-50% Io(nom)  
100  
75  
µS  
MTBF  
3,200,000 hours  
(Telcordia SR332, ground fixed, 40°C):  
Dynamic response 50%-75%-50%,di/  
dt=2.5A/µS  
Weight:  
6.5g  
• Recovery time  
• Overshoot  
µs  
mV  
150  
Protection specifications  
Ripple and noise**  
50  
10  
mVp-p  
ms  
Item  
Test condition  
Min  
Typ  
Max  
Units  
Turn-on delay time Time from instant at  
which Vin=Vin (Turn-  
50  
50  
Input under voltage  
lockout  
• Turn-on  
• Turn-off  
• Hysteresis  
33  
31  
34  
33  
1
36  
35  
V
V
V
on) until Vo=10% of  
Vo (nom)  
Short circuit current  
Hiccup  
0.3  
yes  
A
Turn-on rise time  
Time for Vo to rise  
from 10% of Vo (nom)  
to 90% of Vo (nom)  
10  
ms  
Over current  
protection  
Hiccup mode,  
automatic recovery  
Over voltage  
protection  
Under the converter’s  
maximum allowable  
output power. Hiccup  
mode, minimum  
6
7.2  
V
*
Regulation specifications describe the deviation as the input line voltage or output  
load current is varied from a nominal midpoint value to either extreme (50% load).  
** Output noise may be further reduced by installing an external filter. See  
Ripple&Noise test setup. Use only as much output filtering as needed and no  
more. Larger caps (especially low-ESR ceramic types) may slow transient response  
or degrade dynamic performance. Thoroughly test your application with all  
components installed.  
load of 20%Io max  
Over temperature  
protection  
Automatic recovery  
See OTP section  
115  
5
°C  
°C  
Over Temperature  
Protection Hysteresis See OTP section  
Automatic recovery  
Remote control specifications  
Item  
Test condition  
Min  
-0.7  
2.4  
Typ  
1
Max  
1.2  
Units  
V
Logic low voltage  
Logic high voltage  
Control current  
Example:  
25DMOW_4805S1.5  
25 = 25Watt; D = DIP; M = Miniature; O = Open frame; W = wide  
input (2:1); 36-75Vin; 5Vout; S = single output; 1.5 = 1500VDC  
14  
V
mA  
Page 1 of 6  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
25DMOW_1.5 – Rev. 2020-1.0  
Specifications subject to change without notice.  

与25DMOW相关器件

型号 品牌 获取价格 描述 数据表
25DMOW_1.5 GAPTEC

获取价格

25W - Single Output - Wide Input - Isolated & Regulated
25DMOW_4805S1.5 GAPTEC

获取价格

25W - Single Output - Wide Input - Isolated & Regulated
25DN06 EUPEC

获取价格

Netz-Gleichrichterdiode Rectifier Diode
25DR02 NELLSEMI

获取价格

Glass Passivated Standard Recovery Diodes
25DR04 NELLSEMI

获取价格

Glass Passivated Standard Recovery Diodes
25DR06 NELLSEMI

获取价格

Glass Passivated Standard Recovery Diodes
25DR08 NELLSEMI

获取价格

Glass Passivated Standard Recovery Diodes
25DR10 NELLSEMI

获取价格

Glass Passivated Standard Recovery Diodes
25DR12 NELLSEMI

获取价格

Glass Passivated Standard Recovery Diodes
25DR12M NELLSEMI

获取价格

Glass Passivated Standard Recovery Diodes (Stud Version), 25A