Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998 FAX: (805) 522-9989
E-mail: frontiersales@frontierusa.com
Web: frontierusa.com
Insert Molded Coil—2433 series
A. Mechanical Drawing:
B. Electrical Specification:
Part No.
2433-01
2433-02
2433-03
2433-04
2433-05
2433-06
2433-07
2433-08
2433-09
2433-10
L Min. (uH) L Nom. (uH)
L Max. (uH) Q Min. @ L Nom.
Color
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
Black
0.047
0.068
0.090
0.117
0.148
0.188
0.231
0.272
0.330
0.390
0.048
0.078
0.108
0.146
0.190
0.240
0.292
0.342
0.405
0.465
0.049
0.085
0.126
0.175
0.232
0.292
0.350
0.412
0.480
0.540
90 @ 50MHz
100 @ 50MHz
100 @ 50MHz
94 @ 50MHz
88 @ 50 MHz
78 @ 50 MHz
72 @ 50 MHz
68 @ 50 MHz
66 @ 40 MHz
60 @ 40 MHz
C. Features:
1. Plastic molded.
2. High reliability.
3. Low cost.
D. Measurement:
1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the
bottom of the coil then bent ¼” down from stand off at an angle of 90°.
2. L min. measured with core halfway out of the top of the form.
3. Inductance greater than 0.1uH read at recommended Q meter frequency.
4. Inductance below 0.1uH calculated from readings taken at 50MHz.
E. Test equipment:
Q meter (HP 4342A)
IMC 2433 series
C
Jan. 15, 2010 Page 1 of 1