HARTING Ha-VIS eCon Switches
3 to 16 Ethernet ports RJ45 and SC
Ha-VIS eCon 2000
Fast Ethernet Basic
Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control
cabinets
Commercial Temp.: 0 °C ... +55 °C / Industrial Temp.: -40 °C ... +70 °C
Energy
Efficient
Ethernet
■ Fast Ethernet Non-Blocking Switch architecture according to IEEE 802.3
■ Variants with industrial temperature range of -40°C ... +70 °C
■ Wide range voltage supply 24/48 VDC
■ Surge protection and reverse polarity protection
■ Minimum energy consumption due to Energy-Efficient Ethernet
Target markets
Machinery &
Robotics
Windenergy,
Solar Energy
Industrial Network
Infrastructure
Automation technology
Transportation
Shipbuilding
General description
The Ha-VIS eCon 2000 Fast Ethernet family of unmanaged Ethernet
switches is equipped with up to 16 Fast Ethernet ports and allow for cost-
efficient and quick expansion and/or reconstruction of network
infrastructures. Due to the extremely flat design, these switches can be
accommodated in installations where space is restricted towards the cable
connection at the front.
The selection includes various combinations of variants with RJ45 and fibre
optic ports. Automatic detection of the transmission rate (auto-negotiation)
and of the wiring of the twisted pair data cable (autopolarity and auto-
MDI(X)) allow for simple plug & play. All variants are available with the
temperature ranges „Industrial“ and „Commercial“.
Technical characteristics
Switch Features
Ethernet Ports 10BASE-Te / 100BASE-TX EEE
Connection type
Auto-negotiation
RJ45
Yes
Enclosure width
Number of ports
Switching technology
Supported standards
Frame Size
46.5 mm
3, 4, 5
60 mm
8
120 mm
7, 8
120 mm
16
Store and Forward
IEEE 802.3
1552 bytes
Auto-polarity
Auto-MDI(X)
Transfer conditions
Transfer speed
Transfer length
Yes
Yes
2 kbytes
8 k entries
2 Mbit
Twisted Pair
MAC table size
1k entries
448 kbit
10 / 100 Mbit/s
100 m (twisted pair, Cat 5)
Packet buffer size
Non-blocking
Quality of service
Yes
Yes
Ethernet Ports 100BASE-FX
Energy-Efficient
Ethernet
PROFINET compatible
EthernetIP compatible
Yes
Type of fibre
Multimode (MM)
Singlemode (SM)
Connection type
Transfer conditions
Wavelength
Transfer speed
Transfer length
Output power
Input sensitivity
SC Duplex
Yes
Yes
FO
1310 nm
100 Mbit/s
2 km
-19 dBm ... -14 dBm
≤ -32 dBm
15 km
-15 dBm ... -8 dBm
≤ -34 dBm
Current supply
Nominal voltage
Permissible voltage range
Surge protection
Reverse polarity proof
Starting current
Overcurrent protection at input
Max. power consumption @ 24 VDC
Cross-section / Wire gauge
Connection type
24 VDC
48 VDC
9 VDC ... 60 VDC
Yes
Yes
Ambient conditions
2.80 A
5.60 A
Commercial temperature range
Industrial temperature range
Storage temperature range
Relative humidity (operation)
Relative humidity
(storage and transport)
0 °C ... +55 °C
-40 °C ... +70 °C
-40 °C ... +85 °C
Yes (2/4 A)
0.77 W ... 3.1 W
0.08 mm² ... 2.5 mm² (28 AWG ... 12 AWG)
3-pole, pluggable screwed contact
+ / - /
0 % ... 95 % (not-condensing)
0 % ... 95 % (not-condensing)
2000 m (795 hPa)
Pinout
Supply circuit (according to 60950)
SELV (circuit breaker 10 A)
Air pressure
HARTING Technology Group
P.O.Box 1473, D-32325 Espelkamp
Wilhelm-Harting-Straße 1, D-32325 Espelkamp, Germany
Note: We reserve the right to make technical changes to the products and to the content of this
document at any time without prior notification. The HARTING Technologiegruppe does not accept
any responsibility for possible errors or incompletions in this document. We reserve all the rights to
this document and the topics and illustrations contained within it. Copying, disclosure to third parties
or use of its content - even partially - is forbidden without the prior written consent of the HARTING
Technologiegruppe.
ICPN-Service@harting.com | Service hotline: +49 5772 47-9479
Fax: +49 5772 47-495 | www.HARTING.com/de/ethernet-switches