Datasheet > 225P10256XA2

225P10256XA2

更新时间： 2024-11-30 07:51:03

品牌	Logo	应用领域
威世 - VISHAY		/
页数	文件大小	规格书
5页	280K
描述
CAPACITOR, FILM/FOIL, POLYESTER, 600 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

225P10256XA2 数据手册

Type 225P

Vishay Sprague

Polyester Capacitors

Filmite^®“E”, ORANGE DROP^®, Radial Lead

FEATURES

• Utilizes minimum area where printed wiring

board space is most important

• Wound from PETP polyester film and thin gauge

foil under carefully controlled atmospheric

conditions

RoHS

COMPLIANT

• Protected against moisture by a conformal coating of

epoxy

• Specifically designed for printed wiring board applications

• Widely used in computers, instrumentation and

telecommunications equipment

• 100 VDC through 600 VDC, may be operated up to

+ 125 °C with proper dearting

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 85 °C

To + 105 °C when working voltage is reduced to 70 % of

+ 85 °C rating; to + 125 °C when working voltage is reduced

to 50 % of 85 °C rating

Dielectric Withstanding Voltage:

Capacitors shall withstand a DC potential of 250 % of rated

voltage applied between terminals for not more than 5

seconds. The test voltage must be applied and discharged

through a resistor of 1 ohm per volt.

Insulation Resistance: After a 2 minute charge at rated

voltage or 500 V, whichever is less.

Humidity Test:

Condition capacitors with no voltage applied for 72 hours at

95 % relative humidity and + 75 °C. Remove capacitors from

humidity chamber, wipe surface dry of moisture and dry in

circulating air for 4 hours. Measure insulation resistance after

a 2 minute charge at 25 °C and rated voltage or 500 VDC,

whichever is less. Minimum product of insulation resistance

and capacitance shall be 5000 Megohm - Microfarads after

test but need not exceed 10 000 Megohm. Not more than

one failure allowed in 12 units tested.

At + 25 °C: 100 000 Megohm for C ≤ 0.25 Microfarads

25000 Megohm - Microfarads for C > 0.25 Microfarads

At + 85 °C: 10 000 Megohm for C ≤ 0.15 Microfarads

1500 Megohm - Microfarads for C > 0.15 Microfarads

At + 105 °C: 1500 Megohm for C ≤ 0.17 Microfarads

250 Megohm - Microfarads for C > 0.17 Microfarads

At + 125 °C: 200 Megohm for C ≤ 0.13 Microfarads

25 Megohm - Microfarads for C > 0.13 Microfarads

Capacitance Tolerance and Dissipation Factor:

Capacitors shall be measured at a frequency of 1000 Hz at

+ 25 °C or else be referred to measurements made at that

frequency and temperature. The maximum dissipation factor

shall be 0.75 %

DC Life Test:

Capacitance are capable of withstanding a 500 hour life test

at + 85 °C at 150 % of rated working voltage. After test,

capacitance shall not have changed by more than 5 % of

initial value, insulation resistance shall not have decreased

by more than 50 % of the initial limit and dissipation factor

shall not have increased to more than 1 %.

DIMENSIONS in inches [millimeters]

Max.

T Max.

Max.

0.237

[6.020]

Max.

0.237

[6.020]

Max.

[6.020]

Max.

Lead

Length

Lead

Length

Tinned Copper-Clad Steel

0.032 [0.8ꢀ3] Dia.

(No. 20 AWG)

0.030 [0.762]

0.060 [ꢀ.52ꢁ]

0.030 [0.762]

Terminal A

Terminal B

Terminal D

CASE

CODE

(Max.)

Terminal A and B

Terminal D

0.375 [9.525]

0.719 [18.263]

0.70 [17.78]

0.80 [20.32]

1.25 [31.75]

0.562 [14.275]

0.613 [15.570]

0.969 [24.613]

Document Number: 42016

Revision: 19-Feb-07

For technical questions, contact: spresale@vishay.com

www.vishay.com

12 3 4 5

中文翻译

下载PDF

与225P10256XA2相关器件

型号	品牌	获取价格	描述	数据表
225P10256XB1	VISHAY	获取价格	CAPACITOR, FILM/FOIL, POLYESTER, 600 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS
225P10256XB2	VISHAY	获取价格	CAPACITOR, FILM/FOIL, POLYESTER, 600 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS
225P10256XD3	VISHAY	获取价格	CAPACITOR, FILM/FOIL, POLYESTER, 600 V, 0.001 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS
225P10291W	CDE	获取价格	Radial-lead. Pressed profile
225P10291WA1	CDE	获取价格	—
225P10291WA2	CDE	获取价格	—
225P10291WA3	CDE	获取价格	—
225P10291WD3	CDE	获取价格	Film Capacitor, Polyester, 100V, 10% +Tol, 10% -Tol, 0.001uF, Through Hole Mount, RADIAL L
225P10291WF1	CDE	获取价格	—
225P10291WF2	CDE	获取价格	—

与225P10256XA2相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

49
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

38
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

67
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

63

产品中心

服务支持

精选活动

关于我们

帮助中心

225P10256XA2

225P10256XA2 数据手册

与225P10256XA2相关器件

与225P10256XA2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

225P10256XA2

225P10256XA2 数据手册

与225P10256XA2相关器件

与225P10256XA2相关文章

您还可以找

您在本页遇到什么问题？