Datasheet > 2018875-1

2018875-1

更新时间： 2024-11-22 01:12:39

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
4页	84K
描述
Mini-SAS HD Seating Tool Kit

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

2018875-1 数据手册

Instruction Sheet



Mini-SAS HD Seating Tool Kit

2018875-1, 2018875-2, and 2018875-3

408-32028

08 FEB 12 Rev A

Seating Tool Bottomed

on Cage Assembly

1 X 1 Mini-SAS HD

Connector and Cage

Assembly 2149027-1

(Shown)

Wall Support Tool

(Shown Uninstalled for Clarity)

SEATING

TOOL

KIT NUMBER

MINI-SAS HD

CONNECTOR AND CAGE

CONFIGURATION

Printed Circuit Board (Ref)

2018875-1

2018875-2

2018875-3

1 x 1

1 x 2

1 x 4

Figure 1

damage. The wall support supports the individual

port(s) of the cage assembly to prevent the cage

assembly from collapsing.

1. INTRODUCTION

Mini-SAS HD Seating Tool Kits 2018875-[ ] are used to

seat the Mini-SAS HD connector and cage assembly

configurations given in Figure 1 onto the printed circuit

(pc) board. The connector and cage assemblies

contain press-fit contacts to allow solderless pc board

installation.

3. ASSEMBLY PROCEDURE

3.1. PC Board Support Fixture (Customer Supplied)

A pc board support must be used to provide proper

support for the pc board and to protect the pc board

and product from damage. The support fixture must be

designed for specific needs using the following

recommendations:

Read these instructions thoroughly before using the

seating tool kit.

Dimensions in this instruction sheet are in

NOTE

millimeters [with inch equivalents i.n brackets].

Figures are not drawn to scale.

• It should be at least 25.4 mm [1 in.] longer and

wider than the pc board.

• It should have flat surfaces with holes or a channel

large enough and deep enough to receive any

protruding components of the connector and cage

assembly and to prevent the pc board from bowing.

2. DESCRIPTION

Each seating tool kit consists of a seating tool and a

wall support. The seating tool and wall support are

also available separately. The seating tool has cutouts

(three located on each side) to accept the protruding

parts of the cage assembly. The wall support must be

installed into the port(s) of the cage assembly. The top

of the seating tool provides a surface to accept the

force applied by the application tool to seat the

3.2. Application Tool

Power for seating tools must be provided by an

application tool (with a ram) capable of supplying a

downward force of 44.5 N [10 lb-force] per contact.

Manual Arbor Frame Assembly 58024-1 is available

for use with these seating tool kits. Refer to Instruction

Sheet 408-6923 for operating procedure.

connector and cage assembly onto the pc board.

During seating, the back and sides of the seating tool

protect the connector and cage assembly from

*Trademark



This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com

1 of 4

PRODUCT INFORMATION 1-800-522-6752

LOC B

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.

12 3 4

中文翻译

下载PDF

与2018875-1相关器件

型号	品牌	获取价格	描述	数据表
2018875-2	TE	获取价格	Mini-SAS HD Seating Tool Kit
2018875-3	TE	获取价格	Mini-SAS HD Seating Tool Kit
2018-S1-14-30-640	ECS	获取价格	Card Edge Connector, 36 Contact(s), 2 Row(s), Straight, 0.125 inch Pitch, Wire Wrap Termin
2018-XX-SMH-RPLF	BOURNS	获取价格	Gas Discharge Tube Surge Arrestor with FLAT Technology
201-9.216M-12-15LS-TR	OSCILENT	获取价格	Parallel - Fundamental Quartz Crystal, 9.216MHz Nom, GULLWING, SMD, UM-1, 2 PIN
201-9.216M-12-20S	OSCILENT	获取价格	Parallel - Fundamental Quartz Crystal, 9.216MHz Nom, GULLWING, SMD, UM-1, 2 PIN
201-9.216M-13-15KT-TR	OSCILENT	获取价格	Parallel - Fundamental Quartz Crystal, 9.216MHz Nom, GULLWING, SMD, UM-1, 2 PIN
201-9.216M-16-10S	OSCILENT	获取价格	Parallel - Fundamental Quartz Crystal, 9.216MHz Nom, GULLWING, SMD, UM-1, 2 PIN
201-9.216M-16-50HS-TR	OSCILENT	获取价格	Parallel - Fundamental Quartz Crystal, 9.216MHz Nom, GULLWING, SMD, UM-1, 2 PIN
201-9.216M-20-HS	OSCILENT	获取价格	Parallel - Fundamental Quartz Crystal, 9.216MHz Nom, GULLWING, SMD, UM-1, 2 PIN

与2018875-1相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

27
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

19
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

49
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

47

产品中心

服务支持

精选活动

关于我们

帮助中心

2018875-1

2018875-1 数据手册

与2018875-1相关器件

与2018875-1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2018875-1

2018875-1 数据手册

与2018875-1相关器件

与2018875-1相关文章

您还可以找

您在本页遇到什么问题？