Datasheet > 2018280--4

2018280--4

更新时间： 2024-02-25 08:05:09

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
4页	115K
描述
Small Form- Factor Pluggable (SFP) Seating

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

2018280--4 数据手册

Instruction Sheet

Small Form-Factor Pluggable (SFP)+ Seating

Tool Kits 2018280-[ ] for

Stacked PT Connector and Cage Assemblies

408-10261

10 NOV 11 Rev C

Seating Tool Kit 2018280 -1 Shown

Back

Seating Tool Bottomed

on Cage Assembly

2¢1 SFP+ Stacked PT

Connector and Cage

Assembly (With Gasket)

2007538-1 (Shown)

Wall Support

(For Clarity, Shown

Not Installed)

Press-Fit

Contact

SFP+ CONNECTOR

AND CAGE ASSEMBLY

CONFIGURATION

SEATING TOOL

KIT

2018280--1

2018280--2

2018280--3

2018280--4

2018280--5

2018280--6

2¢1

2¢2

2¢4

2¢6

2¢8

2¢5

Printed Circuit (PC)

Board (Ref)

PC Board Support

Fixture (Ref)

Figure 1

support must be installed into the port(s) of the cage

assembly.

1. INTRODUCTION

SFP+ Seating Tool Kits 2018280--[ ] are used to seat

the SFP+ stacked PT connector and cage assembly

configurations given in Figure 1 onto the pc board.

The connector and cage assemblies contain press--fit

contacts to allow solderless pc board installation.

Read these instructions thoroughly before using the

seating tool kit.

The top of the seating tool provides a surface to

accept the force applied by the application tool to seat

the connector and cage assembly onto the pc board.

During seating, the back and sides of the seating tool

protect the connector and cage assembly from

damage. The wall support supports the individual

port(s) of the cage assembly to prevent the cage

assembly from collapsing.

Dimensions on this sheet are in metric units [with

U.S. customary units in brackets]. Figures are not

drawn to scale.

NOTE

3. REQUIREMENTS

3.1. PC Board Support Fixture (Customer Supplied)

A pc board support must be used to provide proper

support for the pc board and to protect the pc board

and product from damage. The support fixture must

be designed for specific needs using the following

recommendations:

2. DESCRIPTION (See Figure 1)

Each seating tool kit consists of a seating tool and a

wall support. The seating tool and wall support are

also available separately. The seating tool has cutouts

(two located on each side) to accept the protruding

part of the standoffs of the cage assembly. The wall

S it should be at least 25.4 mm [1 in.] longer and

wider than the pc board.

E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company

TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change.

1 of 4

PRODUCT INFORMATION 1--800--522--6752

For latest revision and Regional Customer Service,

visit our website at www.te.com

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.

*Trademark. Other logos, product and/or Company names may be trademarks of their respective owners.

LOC B

12 3 4

中文翻译

下载PDF

与2018280--4相关器件

型号	品牌	获取价格	描述	数据表
2018280-5	TE	获取价格	Stacked Small Form-Factor Pluggable
2018280--5	TE	获取价格	Small Form- Factor Pluggable (SFP) Seating
2018280-6	TE	获取价格	Stacked Small Form-Factor Pluggable
2018280--6	TE	获取价格	Small Form- Factor Pluggable (SFP) Seating
20183	HONEYWELL	获取价格	Other AC and DC Meters Available
2018-35	BOURNS	获取价格	Gas Discharge Tube Surge Arrestor with FLAT Technology
2018-35-SMH-RPLF	BOURNS	获取价格	Gas Discharge Tube Surge Arrestor with FLAT Technology
2018377	TE	获取价格	Impactâ¢ Backplane Connector System
2018378	TE	获取价格	Impactâ¢ Backplane Connector System
2018380	TE	获取价格	Impactâ¢ Backplane Connector System

与2018280--4相关文章

MBRS340T3G手册解读：参数说明、产品特性及应用
2024-06-28

5
PMOS管背靠背连接：串联还是并联？
2024-06-28

7
高压电解电容的分类与选型策略
2024-06-28

8
数码管：基本概念、分类、技术发展及市场趋势
2024-06-27

13

产品中心

服务支持

精选活动

关于我们

帮助中心

2018280--4

2018280--4 数据手册

与2018280--4相关器件

与2018280--4相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2018280--4

2018280--4 数据手册

与2018280--4相关器件

与2018280--4相关文章

您还可以找

您在本页遇到什么问题？