Datasheet > 2-992946-7

2-992946-7

更新时间： 2024-12-02 01:17:59

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
4页	407K
描述
Small Form-Factor Pluggable

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

2-992946-7 数据手册

Instruction Sheet

Small Form-Factor Pluggable (QSFP

Behind Bezel, Customized Heat Sink)

Cage Assembly Seating Tool 2215032-[ ]

408-32208

19 OCT 15 Rev A

Back of

Seating Tool

1 X 6 Seating Tool

(Bottomed on Cage Assembly)

Printed Circuit

(PC) Board (Ref)

1 X 6 Cage Assembly

2143331-7

1 X 6 Wall Support

(For Clarity, Not Shown Installed)

Compliant

Pin Contact

PC Board Support

Fixture (Ref)

SEATING

QSFP CAGE ASSEMBLY

APPLICATION

SPECIFICATION

REPLACEMENT WALL

SUPPORT

CAGE ASSEMBLY

CONFIGURATION

TOOL KIT

2215032-1

2215032-2

2215032-3

CONFIGURATION

1 X 6

1 X 3

1 X 4

2-2215032-1

2-2215032-2

2-2215032-3

1 X 6

1 X 3

1 X 4

114-13120

Figure 1

1. INTRODUCTION

QSFP cage assembly seating tool listed in Figure 1 is used to seat the cage assembly described in Figure 1

onto the pc board. The cage assembly contains compliant pin contacts to allow solderless pc board installation.

Read these instructions thoroughly before using the seating tool kit.

NOTE

Dimensions on this sheet are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for reference

only and are not drawn to scale.

2. DESCRIPTION (Figure 1)

Each seating tool consists of a seating tool and a wall support. The seating tool has cutouts (two located on

each side) to accept the protruding part of the standoffs of the cage assembly. The wall support must be

installed into the ports of the cage assembly.

The top of the seating tool provides a surface to accept the force applied by the application tool to seat the

product onto the pc board. During seating, the back and sides of the seating tool protect the cage assembly

from damage. The wall support supports the individual ports of the cage assembly.

3. REQUIREMENTS

3.1. PC Board Support Fixture (Customer Supplied)

A pc board support must be used to provide proper support for the pc board and to protect the pc board and

the connector and cage assembly from damage. The support fixture must be designed for specific needs using

the following recommendations:

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

*Trademark

PRODUCT INFORMATION 1-800-522-6752

1 of 4

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

12 3 4

中文翻译

下载PDF

与2-992946-7相关器件

型号	品牌	获取价格	描述	数据表
2-992946-8	TE	获取价格	Small Form-Factor Pluggable
2993	ALLEGRO	获取价格	DUAL H-BRIDGE MOTOR DRIVERS
2993-6001	AMPHENOL	获取价格	RF Connector Adapter, SMA-SMA, Plug-plug,
299-43-306-10-001000	MILL-MAX	获取价格	DUAL-IN-LINE SOCKETS Right Angle Mount Closed Frame
299-43-306-11-001000	MILL-MAX	获取价格	DUAL-IN-LINE SOCKETS Right Angle Mount Closed Frame
299-43-308-10-001000	MILL-MAX	获取价格	DUAL-IN-LINE SOCKETS Right Angle Mount Closed Frame
299-43-308-11-001000	MILL-MAX	获取价格	DUAL-IN-LINE SOCKETS Right Angle Mount Closed Frame
299-43-310-10-001000	MILL-MAX	获取价格	DUAL-IN-LINE SOCKETS Right Angle Mount Closed Frame
299-43-310-11-001000	MILL-MAX	获取价格	DUAL-IN-LINE SOCKETS Right Angle Mount Closed Frame
299-43-312-10-001000	MILL-MAX	获取价格	DUAL-IN-LINE SOCKETS Right Angle Mount Closed Frame

与2-992946-7相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

53
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

42
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

70
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

66

产品中心

服务支持

精选活动

关于我们

帮助中心

2-992946-7

2-992946-7 数据手册

与2-992946-7相关器件

与2-992946-7相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2-992946-7

2-992946-7 数据手册

与2-992946-7相关器件

与2-992946-7相关文章

您还可以找

您在本页遇到什么问题？