ICTE5.0 thru ICTE18C
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• Available in Unidirectional and Bidirectional
• 1500 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
• Very fast response time
Case Style 1.5KE
• Low incremental surge resistance
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
MAJOR RATINGS AND CHARACTERISTICS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching
and lighting on ICs, MOSFET, signal lines of sensor
units for consumer, computer, industrial and
telecommunication.
VWM
PPPM
PD
5.0 V to 18 V
1500 W
6.5 W
IFSM
200 A
Tj max.
175 °C
MECHANICAL DATA
Case: Molded epoxy body over passivated junction
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
DEVICES FOR BIDIRECTION APPLICATIONS
For bidirectional types, use C suffix (e.g. ICTE-18C).
Electrical characteristics apply in both directions.
Polarity: For unidirectional types the color band
denotes cathode end, no marking on bidirectional
types
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
PPPM
IPPM
LIMIT
Minimum 1500
see next table
6.5
UNIT
W
Peak pulse power dissipation with a 10/1000 µs waveform (1) (Fig. 1)
Peak pulse current with a 10/1000 µs waveform (1) (Fig. 3)
Power dissipation on infinite heatsink at TL = 75 °C (Fig. 8)
Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2)
Maximum instantaneous forward voltage at 100 A for unidirectional only
Operating junction and storage temperature range
A
PD
W
IFSM
200
A
VF
3.5
V
TJ, TSTG
- 55 to + 175
°C
Note:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minute maximum
Document Number 88356
07-Jun-06
www.vishay.com
1