Datasheet > 1976593-7

1976593-7

更新时间： 2024-11-26 00:58:03

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
2页	73K
描述
Quadrax Ferrule Insertion Tools

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

1976593-7 数据手册

Instruction Sheet



Quadrax Ferrule Insertion Tools

1976593-[ ]

408-10191

08 MAR 12 Rev D

PROPER USE GUIDELINES

Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use

and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.

Reasons for reissue of this instruction sheet are

provided in Section 7, REVISION SUMMARY.

2. DESCRIPTION (See Figure 1)

Pliers

Each insertion tool consists of a pliers and a jaw kit

except Tool -5 which includes four jaw kits (1976593-1

Thumbscrew

(1 Per Jaw)

through -4). The jaw kit consists of a top jaw, bottom

jaw, and two thumbscrews. The top jaw is designed to

hold the cable and the bottom jaw is designed to hold

the shell during insertion of the ferrule.

JawMount

(2 Places)

The jaws are interchangeable between the pliers (of

the insertion tools) and the jaw mounts (of the pliers).

The jaw kits are also available separately (part

numbers are given in Figure 1).

Jaw Kit 

(Refer to Table)

3. JAW INSTALLATION AND REMOVAL

To install the jaws, proceed as follows:

1. Slide the top jaw onto either jaw mount of the

pliers until it stops. Make sure that the thumbscrew

faces outward. Tighten the thumbscrew.

INSERTION

TOOL

JAW KIT †

USED WITH

2. Slide the bottom jaw onto the other jaw mount

until it stops. Make sure that the thumbscrew faces

outward. Tighten the thumbscrew.

Standard Sockets 1445693-[ ]

Boeing BACC47GB1 or BACC47GN1

Standard Pin 1445692-[ ]

1976593-1 1976923-1

1976593-2 1976923-2

3. Close the handles of the pliers until the jaws

bottom. Check that the jaws align.

Boeing BACC47GA1 or BACC47GM1

To remove a jaw, loosen the thumbscrew, and slide the

jaw out of the jaw mount.

1976593-3 1976923-3 Short Socket 2000032-1

1976593-4 1976923-4 Short Pin 2000031-1

All of the

4. USING THE TOOL

1976593-5

All of the Above

Above

These instructions assume that the pin or socket

contact is properly installed onto the cable.



NOTE

Standard Socket 1445693-[ ]

Boeing BACC47GB1 or BACC47GN1

Standard Pin 1445692-[ ]

1976923-1

1976593-6

1976923-2

Refer to Figure 2, and proceed as follows:

1. Fully open the handles of the pliers.

Boeing BACC47GA1 or BACC47GM1

Long Pin 2000377-1

1976593-7 1976923-5

2. Position the shell of the contact in the bottom jaw

so that the shoulder rests on the jaw.

Boeing BACC47GM1

† Included with Insertion Tool and Available Separately.

3. Position the cable in the top jaw. Make sure that

the cable is straight.

Figure 1

1. INTRODUCTION

4. Close the handles until the jaws bottom. Fully

open the handles, and pull the contact and cable

from the jaws.

Quadrax Ferrule Insertion Tools 1976593-[ ] are used

to insert the ferrule into the shell of Quadrax pin and

socket contacts. If used properly, the tool ensures

proper insertion depth.

Boeing is a trademark.

*Trademark



This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com

1 of 2

PRODUCT INFORMATION 1-800-522-6752

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.

中文翻译

下载PDF

与1976593-7相关器件

型号	品牌	获取价格	描述	数据表
1976923-1	TE	获取价格	Quadrax Ferrule Insertion Tools
1976923-2	TE	获取价格	Quadrax Ferrule Insertion Tools
1976923-3	TE	获取价格	Quadrax Ferrule Insertion Tools
1976923-4	TE	获取价格	Quadrax Ferrule Insertion Tools
1976923-5	TE	获取价格	Quadrax Ferrule Insertion Tools
1976978-1	TE	获取价格	This instruction sheet provides application instructions, maintenance, and inspection proc
1976978-2	TE	获取价格	This instruction sheet provides application instructions, maintenance, and inspection proc
1976979-1	TE	获取价格	This instruction sheet provides application instructions, maintenance, and inspection proc
1976979-2	TE	获取价格	This instruction sheet provides application instructions, maintenance, and inspection proc
1976995-2	TE	获取价格	ANVIL, COMBINATION

与1976593-7相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

41
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

33
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

61
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

57

产品中心

服务支持

精选活动

关于我们

帮助中心

1976593-7

1976593-7 数据手册

与1976593-7相关器件

与1976593-7相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

1976593-7

1976593-7 数据手册

与1976593-7相关器件

与1976593-7相关文章

您还可以找

您在本页遇到什么问题？