280 Series
Corrib® Fixed and Adjustable
Vitreous Enamel Power
Corrib® resistors are ideal for applications involving
high currents at very low resistance values—as low
as 0.1Ω for the 300 Watt unit. These large, heavy-
duty resistors are designed to withstand frequent
start-stop cycles characteristic of motor starting,
dynamic braking and other similar applications.
Special order units are available to accommodate up
to 1500 watts.
F ꢀ at u R ꢀ S
•ꢀAlsoꢀavailableꢀinꢀCentohmꢀorꢀSiliconeꢀcoating.ꢀ
Consult Ohmite.
•ꢀRibbedꢀconstructionꢀaidsꢀinꢀrapidꢀcooling.
•ꢀDesignedꢀforꢀequipmentꢀrequiringꢀlowꢀresistanceꢀ
loads at low ohmic values and high current capac-
ity.
•ꢀEspeciallyꢀconstructedꢀforꢀmotorꢀstarting,ꢀdynamicꢀ
braking, etc.
Corribs® are manufactured with corrugated resis-
tive wire. To accelerate cooling, the wire is securely
fused to the ceramic core by the protective vitreous
enamel coating to improve durability. Corrib resis-
tors are hollow-core units which can be securely
fastened to chassis surfaces with thru bolts and
brackets.
•ꢀRoHSꢀcompliantꢀproductꢀavailable.ꢀAddꢀ“E”ꢀsuffixꢀtoꢀ
part number to specify.
chaRactꢀRꢁStꢁcS
RꢀSꢁStoR haRdwaRꢀ
Thru Bolts Mounting Brackets for
300 Watt Corrib
Lugs for 300 Watt
Adjustable Corrib
Lead free vitreous enamel except for extreme
low resistance 35 watt models, and very large
models (750 watts and up), which are supplied
in Silicone Ceramic
Coating
Includes two each bracket, bolt,
washers (centering, mica, lock) and
nut. Note: Single unit mounting
contains one each bolt and nut; two
Part No.
Res. Part No. Res.
1974-A 0.40
1/16 wire 0.50
0.63
1974-B 0.10
1/8 wire 0.12
0.16
Tubular Ceramic
Core
1.00
0.20
Tinned lug with hole. RoHS solder composition
is 96% Sn, 3.5% Ag, 0.5% Cu
Terminals
1.50
0.25
each all washers.
1.60
0.31
Moun.
Derat.
%
2.00
0.80
Part No.
Slotted Elongated
No. of
Resistors
2.50
1.20
Supplied with adjustable 300 watt models. Part
No. 1974-A or 1974-B
Adjustable Lug
3.10
6110-81/2 6126-P-81/2
1
2
3
4
100%
83%
80%
80%
4.00
5.00
-
-
-
6127-P-81/2
6128-P-81/2
6129-P-81/2
6.30
Max. 63Ω for 300W version
±10% (K)
Resistance
Tolerance
Power rating
Derating
8.00
10.00
12.00
16.00
20.00
25.00
30.00
48.00
50.00
Based on 25°C free air rating
Linearly from 100% @ +25°C to 0% @ +400°C
10 times rated wattage for 5 seconds
±400 ppm/°C
Overload
Temperature
coefficient
1000 VAC measured from terminal to mounting
bracket
Dielectric with-
standing voltage
use the formula √P/R
To calculate
max. amps
(continued)
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
115