Datasheet > 18PV-766-R/A2S

18PV-766-R/A2S

更新时间： 2024-11-19 02:48:55

品牌	Logo	应用领域
爱模 - MSYSTEM		DCS 分布式控制系统
页数	文件大小	规格书
2页	89K
描述
Rack-mounted DCS Signal Conditioners 18-RACK

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

18PV-766-R/A2S 数据手册

MODEL: 18PV

/A2: 0.2 – 1.0 bar

/A3: 3 – 15 psig

Rack-mounted DCS Signal Conditioners 18-RACK

P/I TRANSDUCER

Functions & Features

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals on the front and connector on the rear; terminal

cover provided

• Converting a standard pneumatic signal into two

proportional DC outputs

• Second channel output available at the front terminals

and at the Standard Rack connector

Connection

Pneumatic: Rc 1/4" or 1/4" NPT female

(torque ≤ 12 N·m)

Output 1: Connector

Output 2: M3.5 screw terminals (torque 0.8 N·m) and

connector

Power input: Supplied from connector

Screw terminal: Nickel-plated steel

Isolation: Output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

MODEL: 18PV–[1]66–R[2]

INPUT SPECIFICATIONS

■ Input

ORDERING INFORMATION

• Code number: 18PV-[1]66-R[2]

Specify a code from below for each of [1] and [2].

(e.g.18PV-266-R/A2S)

19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm

20 – 100 kPa, 0.2 – 1.0 bar

20.7 – 103.4 kPa, 3 – 15 psig

[1] PNEUMATIC CONNECTION

2: Rc 1/4"

INSTALLATION

Current consumption: Approx. 35 mA

7: 1/4" NPT fitting

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 18BXx or 18KBXx

Weight: 250 g (0.55 lb)

OUTPUT 1

Voltage

6: 1 – 5 V DC (Load resistance 2000 Ω min.)

PERFORMANCE in percentage of span

Accuracy: ±0.2 %

OUTPUT 2

Voltage

Temp. coefficient: ±0.03 %/°C (±0.02 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

6: 1 – 5 V DC (Load resistance 2000 Ω min.)

Permissible overrange: 196 kPa (2.0 kgf/cm2, 1.96 bar, 28

psig)

POWER INPUT

DC Power

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(output 1 to output 2 to power)

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

1500 V AC @ 1 minute (output or power to ground)

[2] OPTIONS

Input

blank: 0.2 – 1.0 kgf/cm

/A1S: 19.6 – 98.1 kPa

/A2S: 20 – 100 kPa

/A3S: 20.7 – 103.4 kPa

18PV SPECIFICATIONS

ES-1820 Rev.10 Page 1/2

http://www.m-system.co.jp/

中文翻译

下载PDF

与18PV-766-R/A2S相关器件

型号	品牌	获取价格	描述	数据表
18PV-766-R/A3	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18-RACK
18PV-766-R/A3S	MSYSTEM	获取价格	Rack-mounted DCS Signal Conditioners 18-RACK
18QA18	SWITCH	获取价格	Interconnection Device,
18QB18	SWITCH	获取价格	Interconnection Device,
18QD18	SWITCH	获取价格	Interconnection Device
18QF18	SWITCH	获取价格	Interconnection Device,
18QH18	SWITCH	获取价格	Interconnection Device
18QK18	SWITCH	获取价格	Interconnection Device,
18QN18	SWITCH	获取价格	Interconnection Device,
18R103	CANDD	获取价格	Radial Lead Inductors