WISE-1540
M2.COM Mesh Network IoT Node
Features
NEW
ARM Cortex-M4 Core Processor
IEEE 802.15.4e standard with self-healing mesh network
99.999% Data Reliability and power optimization
Rich interface for sensor and I/O control
Support wide temperature -40 ~ 85 °C
RoHS
COMPLIANT
2002/95/EC
SRRC
Introduction
WISE-1540 is M2.COM standardized IoT Sensor Node integrated with ARM Cortex-M4 Processor and Dust’s time-synchronized SmartMesh networks. With time slotted channel
hopping (TSCH) link layer, all nodes are synchronized to within less than a millisecond. Time in the network is organized into time slots, which enables collision-free packet exchange
and per-transmission channel-hopping.
All nodes within SmartMesh networks could route, source or terminate data while providing years of battery powered operation. SmartMesh Networks are the great fit for Industry 4.0
Applications to deliver a highly reliable network in the most challenging RF environments such as Machine diagnostics, Factory Automation, Environment Monitoring and Production
Efficiency. In the SmartMesh network, every device has one or more parents which provide redundant paths to overcome communications interruption due to interference, physical
obstruction or multi-path fading. If a packet transmission fails on one path, the next retransmission may try on a different path and different RF channel. Developer can be easily to
extend the network coverage via SmartMesh.
Advantech WISE-1540 also provide multi-interfaces for sensor and I/O control. With Arm mbed embedded microprocessor operating system and add-on software stacks, it's
convenient to support IoT communication protocols including LWM2M, CoAP and MQTT via WISE-3310 Mesh IoT Gateway. Data can be quickly and easily acquired and transformed
into a different format to communicate with WISE-PaaS, Mbed Cloud or other cloud services. Developer can build their application backbone faster and focus on their applications,
value-added services.
Specifications
CPU/MCU
RAM
Flash
STM ARM Cortex-M4 Processor
64 KB
256 KB
M.2 TYPE 2230-D3-E
Processor System
Form Factor
Standard
IEEE 802.15.4e
Frequency Band
Channels
2.4000~2.4835 GHz
15
Topology
Self-Healing Mesh Network
Wireless Network
Transmit Power
Receiver Sensitivity
RF Data Rate
Function
Up to +8 dBm
Up to -93 dBm
250 kbps
End node
Antenna connector
MHF4 connector
Ethernet
Cellular
GPS
-
-
-
UART
CANbus
I2C
UART 1 (4-wire, support RTC/CTS)
-
1
-
I2S
I/O Interface
GPIO
PWM
SPI
8
1
1
ADC
USB
4
1, device only
All product specifications are subject to change without notice.
Last updated: 23-Aug-2017