Type 167/184 Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors for Automatic Insertion
The Type 167/184 series radial lead metallized polyester
box capacitors are available in bulk (Type 167) or on ammo
pack or radial tape and reel (Type 184). These capacitors
are constructed in rugged rectangular plastic cases and all
come with 7.5 mm (0.3”) lead spacing. They are good for
general purpose applications such as bypass, decoupling,
energy storage/discharge and arc suppression.
Highlights
♦ Rugged plastic case
♦ Case and epoxy fill meets UL94V0
♦ 7.5 mm (0.3”) lead spacing
♦ Bulk, tape and reel or ammo pack
♦ Non-inductively wound
♦ Non-polar
Specifications
Capacitance Range:
0.001 µF to 1.0 µF
Voltage Range:
Capacitance Tolerance:
63 Vdc to 630 Vdc (40 Vac to 220 Vac, 60 Hz)
±5%, ±10%, ±20%
1.002
Operating Temperature Range:
Dielectric Withstand Voltage:
Dissipation Factor (DF):
–55 ºC to +125 ºC (with 50% Vdc derating >85 ºC)
1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC
tgδx 10 –4 at 25 ºC ±5 ºC
kHz
1
10
tgδ x 10–4
≤
≤
100
150
Total Self Inductance (L):
Approximately 8 nH
Long Term Stability (after two years): Capacitance change ∆C/C ≤ ±3% under standard
environmental conditions
Maximum Pulse Rise Time (dv/dt):
Vn
V/ms
12
63
100
250
400
630
20
32
41
70
If the working voltage (V) is less than the nominal voltage (Vn),
the capacitor can work at higher dv/dt. In this case, the maxi-
mum value allowed is obtained by multiplying the above value
with the ratio Vn/V.
CDECornellDubilier•1605E.RodneyFrenchBlvd.•NewBedford,MA02744•Ph:(508)996-8561•Fax:(508)996-3830•www.cde.com