In-Vehicle Full HD NVR w/4 PoE Ports
4th Gen. Intel® Core i5 4300U /
ARK-2151V
Celeron 2980U SoC Fanless Box PC
Features
Intel® Celeron 2980U 1.6GHz / Core i5-4300U 1.9 GHz SoC
4 PoE Ports to Support Mainstream IP Cameras
Diversity Communication Abilities, ex. WWAN, WLAN
Built-in GPS and G-Sensor for GIS application
Intelligent Vehicle Power Ignition
9 ~ 36 VDC* Wide Power Input w/isolation
1 x Removable 2.5" drive bay
Supports iManager, SUSIAccess and Embedded Software APIs
ꢀꢁꢂꢃEꢄ
RoHS
CꢀꢁPꢂꢃꢄꢅꢆ
ꢇꢈꢈꢇꢉꢊꢋꢉEC
ꢆ
E180881
ꢅ ꢀ
C
ꢆꢂ
Specifications
ARK-2151V-S6A1E
Intel Celeron 2980U Dual Core
1.6 GHz
ARK-2151V-S9A1E
Intel i5-4300U Dual Core
1.9 GHz
CPU
Frequency
L3 Cache
BIOS
Technology
Max. Capacity
Socket
Processor System
2 MB
3 MB
AMI EFI 128 Mbit
DDR3L 1333 MHz
8 GB
1 x 204-pin SO-DIMM
HD Graphics
DDR3L 1600 MHz
GT2-4400 Graphics
Memory
Chipset
DirectX11.1, OpenGL 4.0, and OpenCL 1.2
Full AVC/VC1/MPEG2 HW Decode
Graphic Engine
Graphics
VGA
HDMI
Up to 1920 x 1200 with 60 Hz, 154 MHz pixel clock rate
Lockable HDMI connector, up to 4K at 24 Hz
Audio
Main System
LAN #1
LAN #2
Realtek ALC888S, High Definition Audio (HD), Line-in, Line out, Mic-in
10/100/1000 Mbps Intel I218 GbE, support Wake on LAN
10/100/1000 Mbps Intel I210-IT, support Wake on LAN
Ethernet
4 x 10/100 Mbps
- 4ports full-load, IEEE802.3af Class 2 (7Watt)
- 2ports full-load, IEEE802.3af Class 3 (15.4Watt)
Power over Ethernet, PoE
N/A
2x isolated RS-232/422/485 with auto flow control (3KV isolation)
2x non-isolated RS-232/422/485 with auto flow control
Serial Ports
2x non-isolated RS-232/422/485 with auto flow control
I/O Interface
CANBus
USB Interface
Option, 2ch CANBus 2.0A/B (1xCOM will be replaced)
2 x USB 2.0 & 2 x USB3.0
6 x DI & 2 x DO w/ 3KV isolation
Input Voltage: 0 to 30 VDC
,
GPIO
Output Current: Max. 500 mA per channel
On-state Voltage: 24 VDC nominal, open collector to 30 VDC
GPS
G-Sensor
On board standalone GPS, support GPS, GLONASS and QZSS signals
On board high resolution G-Sensor, up to 13-bit resolution at 16g
255-level timer interval, setup by software
Full-size Mini PCIe w/SIM holder (PCIe, USB, SATA interface)
Half-size Mini PCIe (PCIe interface)
2 x Full-size Mini PCIe w/SIM holders (USB interface)
1 x removable 2.5" drive bay (Standard 9.5mm height, 15mm height support by project)
Laverage MiniPCIe #1 slot
WES8, WES7, Windows 8, Windows 7
Support by project
Other
Watchdog timer
Mini PCIe #1
Mini PCIe #2
Mini PCIe #3/4
2.5" Drive Bay
mSATA
Expansion
Storage
Microsoft Windows
Linux
Software Support
Power Type
ATX/AT
Power Input Voltage*
Vehicle Power Ignition
Power Consumption
Isolation
Construction
Mounting
9 ~ 36 VDC w/isolation
Selectable boot-up & shut-down voltage, on/off delay time
26W (Typical), 46W (Max)
1.5 KV Isolated
Aluminum housing, Silver
Din-Rail mounting, Desk/wall-mounting, VESA mounting
264.5 x 75.1 x 133.0 mm (10.41" x 2.96" x 5.24")
Power Requirement
Mechanical
26W (Typical), 76W (Max)
Dimensions (W x H x D)
With extended temperature peripherals:-20 ~ 60° C with 0.7m/s air flow
With standard temperature peripherals:0 ~ 45° C with 0.7m/s air flow
Operating Temperature
Storage Temperature
Relative Humidity
Vibration/Shock
EMC
Safety
In-Vehicle Power
-40 ~ 85° C (-40~185° F)
Environment
Regulation
95% @ 40° C (non-condensing)
With mSATA/SSD: IEC 60721-3-5 Class 5M3
CE/FCC Class A, CCC, BSMI
UL, CCC, BSMI, E-Mark (E13)
ISO7637-2 Lev.4
* Power Input Constraint at low voltage: 9~10.9V.
Fanless Embedded Box PCs
All product specifications are subject to change without notice.
Last updated: 3-Jul-2017