Datasheet > 150-11-3

150-11-3

更新时间： 2024-11-17 05:21:19

品牌	Logo	应用领域
APITECH		/
页数	文件大小	规格书
5页	296K
描述
Variable Attenuator, 0MHz Min, 18000MHz Max, 2.2dB Insertion Loss-Max, ROHS COMPLIANT

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

150-11-3 数据手册

Programmable Attenuators

Model 150

Model 151

Model 152

dc to 18.0 GHz

dc to 4.0 GHz

dc to 26.5 GHz

Relay Switched Programmable Attenuators

RoHS

ꢀ

PROGRAMMABILITY: In each programmable step

Attenuator, solenoids are used to switch the internal resistor

card of each cell into and out of the circuit. Once the cell is

switched, the solenoid is magnetically latched into position

and is able to withstand extreme shock and vibration.

Internal circuitry is included to interrupt the coil current after

switching is complete. This reduces power dissipation even

if power is continuously applied. The switching time for each

cell is rated at 20 msec maximum which includes the con-

tact settling time.

BROADBAND ACCURACY & LOW SWR: The use of

Aeroflex / Weinschel's proprietary thin-film resistor process

provides these programmable step attenuators with a high

degree of accuracy and the lowest possible SWR uncer-

tainty (refer to specifications for actual values). This thin film

process permits the construction of circuits which are truly

distributed and without stray reactances, even at the higher

microwave frequencies.

Description

The Model 150, 151 and 152 Programmable Step

Attenuators represent the widest variety of programmable

attenuators available. This attenuator design is the result of

an extensive development program and offers long reliable

operation with exceptional accuracy and repeatability.

These attenuators can provide programmable adjustments

of RF signal levels in precise steps of 1 dB, 5 dB, 10 dB, or

with custom steps available. Each attenuator consists of a

cascaded assembly of

RELIABILITY:

Each programmable step attenuator is

composed of 3 to 5 (4 in most models) cells. As with all

mechanical designs, usable life becomes a primary concern

to the user. With this in mind Aeroflex / Weinschel backs all

these attenuators with a rated switch life of 5 million

operations per cell. Standardized testing is also performed

on each programmable step attenuator over its operating

frequency range by a computer controlled Aeroflex /

Weinschel Attenuation Measurement System which is

traceable to NIST standards.

switched attenuator cells

(Figure 1). The attenuator

elements located in the

attenuator cell are created

a thin-film process

which provides excep-

tional long-term stability,

low power and tempera-

ture coefficients. This

series uses a reed switch-

ing structure that provides

rapid switching together

with low insertion loss.

ENVIRONMENTAL: These Model 150 Programmable Step

Attenuators have undergone an extensive environmental

qualification program and have been subjected to

temperature, shock, vibration, and humidity conditions per

MIL-STD-202F. These programmable step attenuators

operate within these specifications at an ambient

temperature of -20° to +75°C. Operating beyond these

limits will adversely affect the accuracy and could damage

the internal circuitry.

Other features include:

Figure 1. Cell Schematic

Broadband Frequency Coverage

High Accuracy and Repeatability

Long Life, 5 Million Cycles Per Cell

3, 4, and 5 Cell Configurations

For additional information on the 150 Series, visit our website @ www.aeroflex.com/AW/programmables.htm

112

5305 Spectrum Drive, Frederick, MD 21703-7362 ꢀ TEL: 301-846-9222, 800-638-2048 ꢀ Fax: 301-846-9116

web: www.aeroflex.com/weinschel ꢀ email: weinschel-sales@aeroflex.com

Revision Date: 2/12/10

12 3 4 5

中文翻译

下载PDF

与150-11-3相关器件

型号	品牌	获取价格	描述	数据表
150-113-GB	RCD	获取价格	Fixed Resistor, Wire Wound, 3.5W, 11000ohm, 150V, 2% +/-Tol,
150-113-HT	RCD	获取价格	Fixed Resistor, Wire Wound, 3.5W, 11000ohm, 150V, 3% +/-Tol,
150-113-HT20Q	RCD	获取价格	Fixed Resistor, Wire Wound, 3.5W, 11000ohm, 150V, 3% +/-Tol, 20ppm/Cel,
150-113-HTQ	RCD	获取价格	Fixed Resistor, Wire Wound, 3.5W, 11000ohm, 150V, 3% +/-Tol,
1501-13J	FRONTIER	获取价格	General Purpose Inductor, 1uH, 10%, 1 Element, Phenolic-Core
150-113-JT20	RCD	获取价格	Fixed Resistor, Wire Wound, 3.5W, 11000ohm, 150V, 5% +/-Tol, 20ppm/Cel,
1501-13K	FRONTIER	获取价格	General Purpose Inductor, 1uH, 10%, 1 Element, Phenolic-Core
1501-17K	FRONTIER	获取价格	General Purpose Inductor, 2.2uH, 10%, 1 Element, Phenolic-Core
15012	POWERDYNAMICS	获取价格	AUSTRALIAN CORD SET, AS 3112 TO IEC 60320 C13
150-12	JST	获取价格	Ring tongue terminal (R-type, Non-insulated)

与150-11-3相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

13
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

7
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

35
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

31

产品中心

服务支持

精选活动

关于我们

帮助中心

150-11-3

150-11-3 数据手册

与150-11-3相关器件

与150-11-3相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

150-11-3

150-11-3 数据手册

与150-11-3相关器件

与150-11-3相关文章

您还可以找

您在本页遇到什么问题？