Datasheet > 1424686--3

1424686--3

更新时间： 2022-02-26 12:13:53

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
3页	122K
描述
Seating Tool Assemblies

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

1424686--3 数据手册

Instruction Sheet

Seating Tool Assemblies 1424686-[ ]

For PC/104 and PC/104-Plus Connectors

408-8503

05 NOV 09 Rev A

Press (Terminator)

(Ref)

Upper (Ram) Tooling

(Included with Assemblies -1 and -2 Only)

Slide Plate

Base

Fixture Board Assembly

1424685-1

ALSO INCLUDED WITH

SEATING TOOL ASSEMBLY

USE WITH

Manual Press 1428138--1

(Instruction Sheet in Parenthesis)

Manual Seating Tool Assembly 1424931--1

Manual Press Included (408--8505)

1424686--1

Pneumatic Seating Tool Assembly 1424930--1

Pneumatic Press Included (408--8504)

1424686--2

1424686--3

Pneumatic Press 1428137--1

Press Other than Manual or Pneumatic

—

Figure 1

hardware. Assemblies --1 and --2 also contain the

appropriate upper (ram) tooling for the press. The

base mounts to the press. See Figure 1. The slide

plate is detented to ensure proper location of the

connector when terminating.

1. INTRODUCTION

Seating Tool Assemblies 1424686--[ ] are designed to

be used to assist in applying PC/104 and

PC/104--Plus connectors to printed circuit (pc)

boards. The seating tool assembly must be installed

onto a press (refer to Figure 1).

3. OPERATION

Dimensions on this sheet are in millimeters [with

inches in brackets], unless otherwise specified.

Figures are not drawn to scale.

NOTE

1. If applying connectors with organizers, loosen

the set screws securing the insert plate, and

remove the insert plate.

2. Align and adjust the seating tool assembly as

described in Section 4, ADJUSTMENTS.

Reasons for reissue of this instruction sheet are

provided in Section 7, REVISION SUMMARY.

3. If applying connectors with organizers, place the

organizer on the fixture board (in place of the insert

plate). See Figure 2.

2. DESCRIPTION

Each seating tool assembly consists of a base, slide

plate, and Fixture Board Assembly 1424685--1 (also

available separately, refer to 408--8502), and securing

4. Place the pc board on the fixture board

assembly, locating it using the guide posts of the

fixture board assembly (shown in Figure 2).

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.tycoelectronics.com

E2009 Tyco Electronics Corporation, Harrisburg, PA

1 of 3

All International Rights Reserved

TE logo and Tyco Electronics are trademarks.

LOC B

*Trademark. Other products, logos, and company names used are the property of their respective owners.

12 3

下载PDF

与1424686--3相关器件

型号	品牌	描述	获取价格	数据表
1424691	PHOENIX	Circular Connector,	获取价格
1424692	PHOENIX	Circular Connector,	获取价格
1424696	PHOENIX	Circular Connector,	获取价格
142-4701-201	BEL	RF SMA Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Locking, Jack	获取价格
142-4701-206	BEL	RF SMA Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Locking, Jack	获取价格
1424711	PHOENIX	Circular Connector Adapter,	获取价格