Datasheet > 135D477X9025T2

135D477X9025T2

更新时间： 2024-01-26 00:09:13

品牌	Logo	应用领域
威世 - VISHAY		电容器
页数	文件大小	规格书
14页	165K
描述
Tantalum Capacitor, Polarized, Tantalum (wet), 25V, 10% +Tol, 10% -Tol, 470uF, Through Hole Mount, AXIAL LEADED

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

135D477X9025T2 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Active	包装说明：	,
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8532.21.00.20	Factory Lead Time：	9 weeks
风险等级：	5.66	电容：	470 µF
电容器类型：	TANTALUM CAPACITOR	直径：	9.91 mm
介电材料：	TANTALUM (WET)	ESR：	1800 m Ω
JESD-609代码：	e0	漏电流：	0.006 mA
长度：	19.46 mm	安装特点：	THROUGH HOLE MOUNT
负容差：	10%	端子数量：	2
最高工作温度：	200 °C	最低工作温度：	-55 °C
封装形状：	TUBULAR PACKAGE	封装形式：	Axial
包装方法：	TRAY, PLASTIC	极性：	POLARIZED
正容差：	10%	额定（直流）电压（URdc）：	25 V
纹波电流：	1750 mA	表面贴装：	NO
端子面层：	Tin/Lead (Sn/Pb)	端子形状：	WIRE
Base Number Matches：	1

135D477X9025T2 数据手册

135D

Vishay

www.vishay.com

10. Ripple Life Test at + 85 °C: Capacitors shall be tested

in accordance with Military Specification MIL-C-39006

except that:

14. Random Vibration: Capacitors shall withstand

random vibration at all levels up to 51 g RMS overall

when tested in accordance with MIL-STD-202,

method 214, test condition II K. The test shall be

conducted for 1.5 h in each of three mutually

perpenticular directions.

a) Operation conditions: This test shall be run at a

frequency of 40 kHz 2 kHz sinusoidal and at the

RMS ripple current levels specified in the Standard

Ratings and Extended Ratings table.

14.1 Electrical measurements made during the test shall

show no intermittent contacts, open circuits or short

circuits.

b) Applied DC voltage shall be reduced so that the

peak AC voltage plus DC voltage shall not exceed

the rated voltage of the capacitor in either the

forward or reverse direction.

15. Pull Test: Leads shall withstand a tensile stress of 3

lbs. (1.4 kg) for 30 s applied axially in accordance with

MIL-STD-202, method 211, test condition A.

10.1 When tested as specified above, capacitors shall meet

the following requirements:

16. Lead Bend Test: Leads shall meet the bend test

specified in Military Standard MIL-STD-202, method

211 A, condition C except that the number of bends

shall be 4.

a) The DC leakage current at + 25 °C and at + 85 °C

shall not exceed the original requirements.

b) The capacitance shall not change more than 15 %

from the initial measured value.

17. Moisture Resistance: Capacitors shall withstand the

moisture resistance cycling test specified in Military

Standard MIL-STD-202, method 106, without

departure from the original limits of capacitance,

equivalent series resistance and DC leakage current.

c) The dissipation factor shall not exceed the original

requirements.

d) Visual examination: There shall be no damage,

obliteration of marking or leakage of electrolyte.

18. Reduced Pressure: Capacitors shall be stabilized at

a reduced atmospheric pressure of 0.82" [20.83 mm]

of mercury for a period of 5 min. Rated DC voltage

shall be applied for 1 min. Capacitors shall not flash

over nor shall end seals be damaged by this nor

should the capacitors be electrically effected insofar

as capacitance, equivalent series resistance or

leakage current is concerned.

11. Reverse Voltage Test: Capcitors shall withstand a

reverse voltage of 3 V_DCat + 85 °C or 2 V at + 125 °C

for 2000 h. The capacitors shall then be restabilized for

24 h at 85 °C with rated DC forward potential applied

through a 1000  resistor.

11.1 Following the reverse voltage test, the DC leakage

current shall not be in excess of the original

requirement; the equivalent series resistance shall not

19. Seal Test:

exceed 200

% of the initial requirement; the

19.1 Capacitors shall be tested in accordance with

MIL-STD-202, method 112, test condition C,

procedure IIIa. Specimens shall be pressurized at 4

atmospheres (gage) for 4 h.

capacitance value shall not be less than 90 % of the

initial measurement.

12. Mechanical Shock Test: Capacitors shall withstand a

shock of 500 g when tested in accordance with

method 213 of MIL-STD-202, test condition D.

20. Thermal Shock: Capacitors shall be subjected to 300

cycles of thermal shock in accordance with Military

specification MIL-C-39006.

12.1 Following the mechanical shock test, capacitors shall

be examined for evidence of mechanical damage and

leakage of electrolyte. Capacitance, equivalent series

resistance, and DC leakage current shall meet the

initial requirements.

20.1 Following the thermal shock test, capacitor leakage

current shall not exceed twice the initial requirement.

21. Marking: Capacitors shall be marked with Sprague,

the Sprague type (135D); rated capacitance and

tolerance (the tolerance shall be coded, using the list

shown in How to Order); rated DC working voltage at

+ 85 °C; the standard EIA date code of manufacture.

13. High Frequency Vibration: Capacitors shall

withstand vibration from 10 Hz to 2000 Hz at 80 g

without internal damage when tested in accordance

with MIL-STD-202, method 204, test condition H.

Electrical measurements made while under these

conditions shall show no intermittent contacts, open

circuits or short circuits.

21.1 Polarity shall be indicated by plus signs (+) adjacent to

the positive terminal.

13.1 Capacitors shall be securely fastened by means of

suitable component clips or brackets.

Revision: 09-Apr-13

Document Number: 40024

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1...6 7 8910 11 12...14

中文翻译

下载PDF

135D477X9025T2 替代型号

型号	品牌	替代类型	描述	数据表
135D477X9025T2	VISHAY	当前型号	Tantalum Capacitor, Polarized, Tantalum (wet), 25V, 10% +Tol, 10% -Tol, 470uF, Through Hol
135D477X9030T2	VISHAY	类似代替	Tantalum Capacitor, Polarized, Tantalum (wet), 30V, 10% +Tol, 10% -Tol, 470uF, Through Hol
135D477X9030T6	VISHAY	类似代替	Tantalum Capacitor, Polarized, Tantalum (wet), 30V, 10% +Tol, 10% -Tol, 470uF, Through Hol

与135D477X9025T2相关器件

型号	品牌	获取价格	描述	数据表
135D477X9025T6	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 25V, 10% +Tol, 10% -Tol, 470uF, Through Hol
135D477X9030T2	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 30V, 10% +Tol, 10% -Tol, 470uF, Through Hol
135D477X9030T6	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 30V, 10% +Tol, 10% -Tol, 470uF, Through Hol
135D477X9035K2	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 35V, 10% +Tol, 10% -Tol, 370uF, Through Hol
135D477X9035K6	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 35V, 10% +Tol, 10% -Tol, 370uF, Through Hol
135D505X0050C2	VISHAY	获取价格	Wet Tantalum Capacitors Tantalum-Case with Gl
135D505X0050C2E3	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 50V, 20% +Tol, 20% -Tol, 5uF, Through Hole
135D505X5050C0E3	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 50V, 5% +Tol, 5% -Tol, 5uF, Through Hole Mo
135D505X5050C6E3	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 50V, 5% +Tol, 5% -Tol, 5uF, Through Hole Mo
135D505X9050C2	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 50V, 10% +Tol, 10% -Tol, 5uF, Through Hole

与135D477X9025T2相关文章

晶闸管阳极与阴极之间加电压时控制极的电流流动分析
2024-06-05

7
探究MOS管沟道夹断后载流子传输机制及其电路设计影响
2024-06-05

7
光敏电阻的工作原理、作用及检测方法
2024-06-05

5
ENC28J60以太网控制器全面解析：特性、应用、引脚说明
2024-06-05

2

产品中心

服务支持

精选活动

关于我们

帮助中心

135D477X9025T2

135D477X9025T2 技术参数

135D477X9025T2 数据手册

135D477X9025T2 替代型号

与135D477X9025T2相关器件

与135D477X9025T2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

135D477X9025T2

135D477X9025T2 技术参数

135D477X9025T2 数据手册

135D477X9025T2 替代型号

与135D477X9025T2相关器件

与135D477X9025T2相关文章

您还可以找

您在本页遇到什么问题？