Document 185-1
™
Maxi Spring Air Core Inductors
•ꢀAirꢀcoreꢀinductorsꢀfeatureꢀhigherꢀQ,ꢀLꢀandꢀcurrentꢀratings
•ꢀRigidꢀpackageꢀprovidesꢀaꢀflatꢀsurfaceꢀforꢀpickꢀandꢀplace
•ꢀLeadsꢀareꢀlockedꢀinꢀpositionꢀforꢀpreciseꢀterminalꢀspacing
Weight 0.42– 0.59 g
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 800/13″ reel Plastic tape: 24 mm wide, 0.3 mm thick,
12 mm pocket spacing, 6.1 mm pocket depth
PCB washing Only pure water or alcohol recommended
Inductance2
(nH)
Percent
Q2
Q2
Test freq.
(MHz)
SRF min4 DCR max5 Irms6
Part number1
Turns
9
10
11
12
tolerance3
typ
min
(GHz)
1.140
1.020
0.900
0.875
0.800
(mOhm)
15
(A)
3.5
3.5
3.0
3.0
3.0
132-09SM_L_
132-10SM_L_
132-11SM_L_
132-12SM_L_
132-13SM_L_
90
111
130
169
206
5,2
5,2
5,2
5,2
5,2
114
104
104
114
114
95
87
87
95
95
50
50
50
50
50
15
20
25
30
13
132-14SM_L_
132-15SM_L_
132-16SM_L_
132-17SM_L_
132-18SM_L_
14
15
16
17
18
222
246
307
380
422
5,2
5,2
5,2
5,2
5,2
110
114
114
114
114
92
95
95
95
95
50
50
50
50
50
0.730
0.685
0.660
0.590
0.540
35
35
35
50
60
3.0
3.0
3.0
2.5
2.5
132-19SM_L_
132-20SM_L_
19
20
491
538
5,2
5,2
114
104
95
87
50
50
0.535
0.490
65
90
2.0
2.0
1. When ordering, specify tolerance, termination and packaging codes:
2. Inductance and Q tested at 50 MHz on an Agilent/HP 4291A with a
16193 fixture and correlation.
132-20SMGLD
3. Tolerances in bold are stocked for immediate shipment.
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
4. SRF tested on the Agilent/HP 8753D and a Coilcraft CCF1248 test
fixture.
5. DCR tested on the CambridgeTechnology Model 510 Micro Ohmmeter.
6. Current that causes a 15°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Tolerance: G= 2% J = 5%
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape
(800 parts per full reel).
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
B = Less than full reel. In tape, but not machine-ready. To
have a leader and trailer added ($25 charge), use code
letter D instead.
Document 185-1 Revised 01/11/11