New generation external-thread DIN Valve Connectors with unsurpassed
IP67 sealing properties and superior cable retention increase performance and
reliability, simplify the manufacturing process and reduce overall applied costs
for hydraulic, pneumatic and electromagnetic devices
Brad® mPm® DIN
Valve Connectors
External Thread, Field
Attachable
Brad mPm DIN valve connectors conform to industry standard EN 175301-803 (formerly
DIN 43650).This is the standard for a series of electrical connectors which are commonly
used with solenoid valves, especially those used on valves in hydraulics and pneumatics.
Molex’s innovative external-nut design reduces the number of individual components within
the DIN valve connector to simplify assembly and mounting processes. Since the housing of the
new design does not protrude past the toe of the nut, the external width of the connector has not
increased and thus has no impact on the customer’s application.
121201 DIN Form A
121207 DIN Form A + Circuit
121202 DIN Form Industrial
121208 DIN Form Industrial + Circuit
121203 DIN Form B
Traditional DIN connectors are supplied to the customer pre-assembled, requiring disassembly
before terminating the cable is possible.The new generation of DIN connectors from Molex are
supplied in single sets, or as bulk components, further reducing labour time and costs.
121204 DIN Form C
121205 DIN Form Micro
Standard circuitry options available include light-emitting diode (LED) and bi-polar LED
indicators, blocking diodes to protect against overvoltage or peaks when switching off and
voltage-dependent resistors (VDR) to protect supply and switch. For additional information
visit: www.molex.com/link/dinvalve.html
FEATURES AND BENEFITS
• Ergonomic external-nut design provides
greater and consistent torque for a more
uniform seal between connector and cable
• Internal volume of Form C housing
increased by 30% with no change
to external dimensions of connector;
improves handling, wire routing and speed
of assembly
• Conforms to industry standard interface
EN 175301-803 (formerly DIN 43650)
• Accommodates PG9, PG11 cable and up
to 9.00mm (.354") outer cable diameter
External Thread, Field
Attachable mPm®
DIN Valve Connectors
• Cable retention force increased by up to
115% over internal-nut designs for
increased reliability
• Connectors supplied in a ‘ready-to-use’
disassembled condition; saves the
customer an estimated 20 seconds
disassembly time per part
• Integrated ‘self-retaining’ front gasket
within housing on Form A, Form B and
Form Industrial ensures IP67 sealing
properties are achieved
• One size fits all cables! Reduces customer
inventory, contributing to cost savings;
eliminates installation errors
• Waterproof rating of IP67; improved from
IP65 for a greater range of application
opportunities
• Plus / minus screw head on terminal
enables the use of air tools in volume
production; a flat or Phillips-head
screwdriver can be used by the installer in
a field application
MARKETS AND APPLICATIONS
• Industrial
- Pneumatic valves
- Hydraulic valves
- Solenoid valves
- Pressure switches
- Transducers
- Mining machinery
• Factory automation
- Robotics
- Complex machine builders
Robotics
Pressure valves
• Non-automotive transportation
- Garbage trucks
- On-vehicle crane and lifting equipment
• Used across all markets where signal and
power connections are required to
perform in a rugged environment
Hydraulics in construction equipment and garbage trucks