5秒后页面跳转
115GT300C5A0A1 PDF预览

115GT300C5A0A1

更新时间: 2024-12-01 03:24:15
品牌 Logo 应用领域
西迪斯 - CTS 电阻器可变电阻器
页数 文件大小 规格书
3页 475K
描述
Commercial 3/4inch (19mm) Diameter, 2 watt Wirewound Variable Resistor

115GT300C5A0A1 数据手册

 浏览型号115GT300C5A0A1的Datasheet PDF文件第2页浏览型号115GT300C5A0A1的Datasheet PDF文件第3页 
Series 115  
®
Commercial 3/4"  
(19mm) Diameter,  
2 watt Wirewound  
Variable Resistor  
Features  
• Fully enclosed construction  
• Four mounting styles  
• Long rotational life  
• Optional grounded or insulated rotor  
construction  
• Incorporated fixed resistor available  
• Available with nylon shaft  
• Interchangeable mounting with  
CTS series 110 preset potentiometers  
• RoHS compliant  
Electrical and Mechanical Specifications  
Resistor Adjustment  
Resistance Range  
Standard: Cross slot provided in rotor for screwdriver  
adjustment.  
Special: Molded nylon, screwdriver-slotted shafts which  
are integral with rotor are available in many lengths  
in increments of 1/8" (3.2mm) up to a maximum  
of 2" (50.8mm).Consults with the factory  
1 ohm through 20K ohms (linear taper)  
Resistance Tolerance  
Standard: ±20%  
Special: ±5% or ±10%  
Power Rating, Watts  
2 watts @ 55°C derated to no load @ 105°C  
mounted on steel panel  
1.5 watts @ 55°C derated to no load @ 105°C,  
mounted on bakelite panel  
Mounting Types Available  
Printed circuit mounted: Type 115 P  
Twist tab mounted:  
Snap-in mounted:  
Rivet ear mounted:  
Type 115 T  
Type 116 E  
Type 117 R  
Voltage Rating  
Terminals to case (insulated types only)  
High pot test, one minute — 900 VAC  
Operating maximum — 500 VDC  
Across end terminals  
Terminal Information  
Grounded Construction — The grounded construction is  
supplied without a center terminal and the contactor is  
connected to the case. This construction can be furnished  
with one end terminal at either end of the resistance  
element or with terminals at both ends of the element.  
Determined by resistance value and wattage rating  
Resistance Taper  
Standard: Linear taper only  
Insulated Construction — The contactor is insulated from the  
base and connected to the center terminal on the insulated  
construction. This construction can be supplied with the  
center terminal and one end terminal at either end of the  
resistance element or with the center terminal and terminals  
at both ends of the resistance element.  
Taps Available  
None  
Incorporated Fixed Resistor  
A fixed resistor can be incorporated in the Series 115  
at the end of CW or CCW rotation to a minimum of 15%  
of the total resistance value. The rotation is shortened  
by an amount proportional to the ratio of the fixed resistor  
to the total resistance value.  
Rotational Torque  
1/2 to 10 in-oz. (36 – 720 gf-cm)  
Stop Strength  
4 in-oz. (4.6 Kgf-cm)  
Angle of Rotation  
Tatol Rotation: 270° ± 5°  
9/30/06  
1 - 3  
© 2006 CTS Corporation. All rights reserved. Information subject to change.  
CTS Electronic Components  
www.ctscorp.com  

与115GT300C5A0A1相关器件

型号 品牌 获取价格 描述 数据表
115GT300C5A0B1 CTS

获取价格

Commercial 3/4inch (19mm) Diameter, 2 watt Wirewound Variable Resistor
115GT300C5A0C1 CTS

获取价格

Commercial 3/4inch (19mm) Diameter, 2 watt Wirewound Variable Resistor
115JE300C100A1 CTS

获取价格

Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor
115JE300C100B1 CTS

获取价格

Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor
115JE300C100D1 CTS

获取价格

Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor
115JE300C101A1 CTS

获取价格

Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor
115JE300C101B1 CTS

获取价格

Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor
115JE300C101C1 CTS

获取价格

Commercial 3/4inch (19mm) Diameter, 2 watt Wirewound Variable Resistor
115JE300C101D1 CTS

获取价格

Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor
115JE300C102A1 CTS

获取价格

Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor