Document Number: MC10XS4200
Rev. 2.0, 6/2012
Freescale Semiconductor
Advance Information
Dual 24 V, 10 mOhm High Side
Switch
10XS4200
The 10XS4200 device is part of a 24 V dual high side switch product
family with integrated control, and a high number of protective and
diagnostic functions. It has been designed for truck, bus, and industrial
applications. The low RDS(ON) channels (<10 mΩ) can control different
load types; bulbs, solenoids, or DC motors. Control, device
configuration, and diagnostics are performed through a 16-bit serial
peripheral interface (SPI), allowing easy integration into existing
applications.
HIGH SIDE SWITCH
Both channels can be controlled individually by external or internal
clock signals, or by direct inputs. Using the internal clock allows fully
autonomous device operation. Programmable output voltage slew-
rates (individually programmable) helps improve electromagnetic
compatability (EMC) performance. To avoid shutting off the device
upon inrush, while still being able to closely track the load current, a
dynamic over-current threshold profile is featured. Switching current of
each channel can be sensed with a programmable sensing ratio.
Whenever communication with the external microcontroller is lost, the
device enters a Fail-safe operation mode, but remains operational,
controllable, and protected.
FK SUFFIX (PB-FREE)
98ASA00428D
23 PIN PQFN (12 X12 mm)
Features
ORDERING INFORMATION
Temperature
• Two fully protected 10 mΩ (@ 25 °C) high side switches
• Up to 6.0 A steady state current per channel
• Separate bulb and DC motor latched over-current handling
• Individually programmable internal/external PWM clock signals
• Over-current, short-circuit, and over-temperature protection with
programmable autoretry functions
Device
Package
Range (T )
A
MC10XS4200FK
-40 to 125 °C
23 PQFN
• Accurate temperature and current sensing
• Open-load detection (channel in OFF and ON state), also for LED
applications (7.0 mA typ.)
• Normal operating range: 8.0 - 36 V, extended range: 6.0 - 58 V
• 3.3 V and 5.0 V compatible 16-bit SPI port for device control,
configuration and diagnostics at rates up to 8.0 MHz
VDD
VDD
VPWR
10XS4200
VDD
CLOCK
FSB
SCLK
CSB
SO
VPWR
HS0
I/O
I/O
SCLK
CSB
SI
LOAD
LOAD
MCU
I/O
SO
I/O
RSTB
SI
IN0
HS1
M
I/O
IN1
CONF0
CONF1
FSOB
SYNC
CSNS
I/O
A/D
A/D
GND
GND
Figure 1. Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2012. All rights reserved.