10ACM_S3 series
10W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated
AC-DC Converter
10 Watt
Universal Input:
Over voltage protection
Over current protection
High power density, high
reliability
Designed to meet IEC/EN/
UL60335 safety standards
IEC/EN/UL62368 approved
The 10ACM_S3 series is a highly efficient green power AC-DC Converter
series. They feature ultra-wide wide input range accepting either AC or
DC voltage, high efficiency, low power consumption and CLASS II
reinforced insulation. All models are particularly suitable for industrial
control, electric power, instrumentation and smart home applications
which don’t have high requirement for dimension. A variety of EMC
external circuits meet the needs of multiple industries.
85 - 305VAC/100 - 430VDC
Operating temperature range:
-40°C to +85°C
Isolation voltage up to 3kVAC
Low power consumption,
green power
Short circuit protection (SCP)
UL-62368-1 (E347551)
Approval
Model
Power
[W]
Output voltage
[V]
Output current
[mA, max]
Efficiency
[%, typ]
Capacitive load
[µF, max]
UL/CE/CB
UL/CE/CB
UL/CE/CB
UL/CE/CB
UL/CE/CB
UL/CE/CB
10ACM_03S3
10ACM_05S3
10ACM_09S3
10ACM_12S3
10ACM_15S3
10ACM_24S3
6.6
10
10
10
10
10
3.3
5
2000
2000
1100
830
70
76
78
80
81
1500
1500
1000
680
9
12
15
24
670
470
420
82
330
Input specifications
Input voltage range
Input frequency
Input current
Output specifications
85~305VAC, 100~430VDC
47~63Hz
Voltage accuracy
3.3V output: 1.5ꢀ ꢁtypꢂ) 3ꢀ ꢁmaxꢂ
Others: 1ꢀ ꢁtypꢂ) 2ꢀ ꢁmaxꢂ
Minimum load
0ꢀ
115VAC
• 0.3A ꢁtypꢂ
230VAC
• 0.15A ꢁtypꢂ
Line regulation ꢁfull loadꢂ
Load regulation ꢁ0ꢀ to 100ꢀꢂ
0.5ꢀ ꢁtypꢂ) 1ꢀ ꢁmaxꢂ
1ꢀ ꢁtypꢂ) 1.5ꢀ ꢁmaxꢂ
Inrush current
Hot plug
115VAC
• 15A ꢁtypꢂ
230VAC
• 30A ꢁtypꢂ
Ripple & Noise*
20MHz bandwidth ꢁpeak-peak valueꢂ
80mV ꢁtypꢂ
150mV ꢁmaxꢂ
Unavailable
1A
Recommended external input
fuse
slow blow,
required
Short circuit protection
Over current protection
Hiccup, continuous, self-recovery
≥110ꢀIo self-recovery
Over voltage protection
• 3.3VDC/5VDC: ≤9VDC
• 9VDC: ≤15VDC
Example:
ꢁOutput voltage clamp or hiccupꢂ
10ACM_05S3
• 12VDC/15VDC: ≤25VDC
10 = 10Watt; AC = AC-DC; M = case style; 5Vout; S = Single Output;
3 = 3kVAC isolation
* Ripple and noise are measured by “parallel cable” method.
Note:
1. External electrolytic capacitors are required to modules, more details refer to
typical applications.
2. This part is open frame, at least 6.4mm safety distance between the primary
and secondary external components of the module is needed to meet the safety
requirement.
3. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta = 25°C, humidity <75ꢀ, nominal input voltage ꢁ115V and
230Vꢂ and rated output load.
4. In order to improve the efficiency at light load, there will be audible noise gene-
rated, but it does not affect product performance and reliability.
5. Module required dispensing fixed after assembled.
6. All index testing methods in this datasheet are based on our company corpo-
rate standards.
7. We can provide product customization service, please contact our technicians
directly for specific information.
8. Products are related to laws and regulations: see „Features“ and „EMC“.
9. Our products shall be classified according to ISO14001 and related environmen-
tal laws and regulations, and shall be handled by qualified units.
Page 1 of 7
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
10ACM_S3 – Rev. 2020-1.1
Specifications subject to change without notice.