General Purpose Relays
Power Relays
Potter & Brumfield
T9G series, DC coil 30A PCB Relay (Continued)
Coil Data (continued)
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Initial surge withstand voltage
between contact and coil
Initial insulation resistance
between insulated elements
Clearance/creepage
1500Vrms
4000Vrms
8kV
1x109Ω, 500VDC
>6.4mm / >8mm
between contact and coil
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DC coil
Operating -40 to + 105°C at reduced current
Category of environmental protection
IEC 61810
RTII - flux proof
RTIII - wash tight
Vibration resistance (functional)
Opening NO contact >10g
Opening NC contact >7g
10g for 11msec
Shock resistance (functional)
Shock resistance (destructive)
Terminal type
100g
pcb-tht and pcb-tht + quick connect
18g mounting code 1
23g mounting code 2
Weight
Resistance to soldering heat THT
IEC 60068-2-20
260°C/5s
Packaging/unit
10/tube, 420/box (PCB + QC), 500/box (PCB)
PCB layout
Bottom view on pins
T9G - Mounting and termination code 1
T9G - Mounting and termination code 2
Only necessary terminals are
present on single throw models.
Consequently, some holes will
be unnecessary for single throw
models.
Only necessary terminals are
present on single throw models.
Consequently, some holes will
be unnecessary for single throw
models.
2
03-2021, Rev. 0321
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2017 Tyco Electronics Corporation,
a TE Connectivity Ltd. company