Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 163-1
™
Micro Spring Air Core Inductors
• Small air core inductors feature high Q and tight tolerances
• Acrylic jacket provides a flat top for pick and place
• Solder coated leads ensure reliable soldering
AEC
+
Q200 125°C
Terminations RoHS compliant tin-silver over copper Other termina-
tions available at additional cost.
Weight 0906: 10–12 mg; 1606: 18 – 27 mg
Ambient temperature –40°C to +125°C with Irms current
Maximum part temperature +140°C (ambient + temp rise)
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 0906: 500 per 7″ reel Plastic tape: 8 mm wide,
0.3 mm thick, 4 mm pocket spacing, 1.5 mm pocket depth
1606: 500 per 7″ reel Plastic tape: 12 mm wide, 0.3 mm thick,
4 mm pocket spacing, 1.6 mm pocket depth
Recommended pick and place nozzle: OD: 0.059″; ID: 0.035″
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part
Inductance2
(nH)
Percent
Q4
min
SRFmin5
(GHz)
DCRmax6
(mOhm)
Irms7
(A)
number1
Turns
tolerance3
0906-2_L_
0906-3_L_
0906-4_L_
0906-5_L_
1606-6_L_
2
3
4
5
6
1.65
2.55
3.85
5.40
5.60
10,5,2
5,2,1
5,2,1
5,2,1
5,2,1
100
100
100
100
100
10.0
8.2
7.5
7.0
6.5
4.0
5.0
6.0
8.0
9.0
1.6
1.6
1.6
1.6
1.6
1606-7_L_
1606-8_L_
1606-9_L_
1606-10_L_
7
8
9
7.15
8.80
9.85
5,2,1
5,2,1
5,2,1
5,2,1
100
100
100
100
6.0
6.0
5.2
4.6
10
12
13
14
1.6
1.6
1.6
1.6
10
12.55
1. When ordering, specify tolerance, termination and packaging codes:
1606-10GLC
2. Inductance measured at 800 MHz using Agilent/HP 4286 or equivalent
with a Coilcraft SMD-A fixture and correlation.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 800 MHz using an Agilent/HP 4291A with an Agilent/
HP 16193A test fixture or equivalents.
Tolerance: F = 1% G = 2% J = 5% K = 10% (Table shows stock
tolerances in bold.)
5. SRF measured using an Agilent/HP 8720D or equivalent with a Coilcraft
SMD-D fixture.
6. DCR tested on the Cambridge Technology Model 510 Micro-ohmmeter
or equivalent.
7. Current that causes a 15°C temperature rise from 25°C ambient.This
information is for reference only and does not represent absolute maxi-
mum ratings.
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape, 500 parts per full reel. Quantities less than full
reel available: in tape (not machine ready) or with
leader and trailer ($25 charge)
B = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the need
for multiple packaging codes. When ordering, simply
change the last letter of your part number from B to C.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
P = 7″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (3000 parts per
full reel).
Document 163-1 Revised 05/10/21
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2021
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
