Mini-Mac Applicator for Female Flag QD Crimp Terminals
Mini-Mac Applicator
Application Tooling Specification
Mechanical Feed-Front Metal Strip
Order No. 63895-0800
FEATURES
ꢀ
ꢀ
ꢀ
Directly adapts to most automatic wire processing machines
Applicator designed to industry standard mounting and shut height 135.80mm (5.346")
Quick set-up time; plus the crimp height, track and feed adjustments can be set without removing the applicator
from the press
ꢀ
ꢀ
Fine adjustment allows users to achieve target with little effort by adjusting in increments of .015mm (.0006") for
conductor crimp height and .063mm (.0025") for insulation height
Independent adjustment rings allow users to quickly adjust the conductor or insulation crimp height without
affecting each other.
SCOPE
Products: Quick Disconnect, Female, Flag, for 0.50-1.00mm² (18-20 AWG) Wire, Accepts 6.35mm (.250") by
0.81mm (.032") Tab Crimp Terminals.
Insulation Diameter
IPC/WHMA-A620ꢀ Terminal (Max)ꢀꢀ
Wire Size
AWG mm²
Strip Length
Terminal
Series No.
Terminal
Order No.
mm
In.
mm
In.
mm
In.
-
-
-
2.50
1.50
1.00
94030
94030-5010 94030-5011
2.10-2.60 .083-.102
3.70
.146
6.00-7.00 .236-.276
ꢀTo achieve optimum IPC-A620 insulation crimps, use this insulation OD range.
ꢀꢀOverall insulation OD specification for terminal.
DEFINITION OF TERMS
STRIP
LENGTH
SEAM
CONDUCTOR
CRIMP
WIRE
INSULATION
CRIMP
The above terminal drawing is a generic terminal representation. It is not an image of any terminal listed in the
scope.
Doc No: ATS-638950800
Revision: A
Release Date: 10-07-08
Revision Date: 10-07-08
UNCONTROLLED COPY
Page 1 of 5