Datasheet > 015Z150/H109

015Z150/H109

更新时间： 2022-01-18 16:01:00

品牌	Logo	应用领域
其他 - ETC		/
页数	文件大小	规格书
2页	107K
描述
TEMP ALARM HOTSPOT

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

015Z150/H109 数据手册

HotSpot-Z — Temperature Alarm

martFan HotSpot-Z is a compact, multiple-

output temperature alarm. Trigger tempera-

ture is adjustable by means of a jumper on

the circuit board. Normally open or normally

closed outputs can drive a logic circuit, LED or

piezo alarm. Alarms are referenced to ground.

An additional normally closed optically isolated

output is provided. HotSpot-Z is compatible

with temperature sensors P1 through P9 shown

on page 34.

For additional information see:

page 34 Sensors

FEATURES

• Wide input voltage range of 5.0 to 25.0 VDC

1.100

(27.9)

• Selectable alarm trigger temperature of 45°, 50°, or

55°C (86°, 92° or 98°C w hen P3 sensor is used)

0.20

(5.1)

0.700

(17.8)

• Normally open and normally closed outputs provide

nominal 8 mA to an LED connected betw een the

output and L. They can sink at least 4 mA at 0.4 VDC

to drive a logic circuit. A piezo alarm w ould be

connected betw een NO and +. Outputs are

referenced to ground

• Optically isolated output sinks at least 1 mA at 0.4 volts

• Optional isolated MOS relay alarm output for high

current or high voltage applications

Normally Closed (E,C) Alarm Output: Optically

isolated to drive logic circuits. Closed and can

sink at least 1.0 mA at 0.4 volts below trigger

temperature. Open above trigger temperature

and will accept up to 30 VDC.

0.156 D(2)

(3.96)

.560 MAX

(14.2)

Normally Closed (NC) Alarm Output: Closed

below trigger temperature and will sink 4 mA at

0.4 volts or less. Open above trigger temperature

and will accept up to 30 VDC. Applies nominal 8

mA to an LED connected from NC to L.

SPECIFICATIONS

Part Number

Sensor Type

Normally Open (NO) Alarm Output: Open below

trigger temperature and will accept up to 30

VDC. Closed above trigger temperature and will

sink 4 mA at 0.4 volts or less. Applies nominal 8

mA to an LED connected from NO to L. Applies

nominal power supply voltage to a piezo alarm

connected from NO to +.

015Z150

015Z150S

H109

Header on board for remote sensor

Sensor soldered to board

Hardware Pack

Note: Maximum operating temperature is 65°C

CONTROL

RESOURCES

INCORPORATED

E-mail: sales@controlres.com

■

Web: w w w.controlres.com

下载PDF

与015Z150/H109相关器件

型号	品牌	描述	获取价格	数据表
015Z2	TOSHIBA	DIODE (CONSTANT VOLTAGE REGULATION APPLICATIONS)	获取价格
015Z2.0	TOSHIBA	DIODE (CONSTANT VOLTAGE REGULATION APPLICATIONS)	获取价格
015Z2.0X	TOSHIBA	DIODE 1.95 V, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, Voltage Regulator Diode	获取价格
015Z2.0-X	TOSHIBA	DIODE 0.2 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, 1-1F1A, 2 PIN, Voltage Regul	获取价格
015Z2.0Z	TOSHIBA	DIODE 2.05 V, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, Voltage Regulator Diode	获取价格
015Z2.0-Z	TOSHIBA	DIODE 0.2 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, 1-1F1A, 2 PIN, Voltage Regul	获取价格