ZX 3.9 ... ZX 200 (12.5 W)
Silicon-Power-Z-Diodes
Silizium-Leistungs-Z-Dioden
Nominal Zener voltage
3,9...200 V
Nominale Zener-Spannung
Standard tolerance of Zener voltage
± 5 % (E24)
Standard-Toleranz der Zener Spannung
Metal case – Metallgehäuse
DO-4
5.5 g
1 Nm
Weight approx. – Gewicht ca.
Admissible torque for mounting on cooling fin
Zulässiges Anzugsdrehmoment
ZX...: Cathode to stud / Kathode am Gewinde
ZX...R: Anode to stud / Anode am Gewinde
Dimensions / Maße in mm
Standard Z-voltage tolerance is graded to the international E 24 standard.
Other voltage tolerances and higher Z-voltages on request.
Die Toleranz der Arbeitsspannung ist in der Standard-Ausführung gestuft nach der
internationalen Reihe E 24. Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Maximum ratings
Grenzwerte
Power dissipation without cooling fin
Verlustleistung ohne Kühlblech
TA = 25 °C
TA = 25 °C
TA = 25 °C
Ptot
Ptot
PZSM
Tj
1.56 W
12.5 W
Power dissipation with cooling fin 150 cm2
Verlustleistung mit Kühlblech 150 cm2
Non repetitive peak power dissipation, t < 10 ms
Einmalige Impuls-Verlustleistung, t < 10 ms
100 W
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
– 55…+150°C
TS – 55…+175°C
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
RthA
RthC
< 80 K/W
< 5 K/W 1)
Thermal resistance junction to stud
Wärmewiderstand Sperrschicht – Schraube
Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite
1
)
Valid if mounted on vertical cooling fin 150 cm2 – Gültig bei Montage auf senkrecht stehendem Kühlblech 150 cm2
144
01.04.2000