PRECISION 2.5 VOLT MICROPOWER
VOLTAGE REFERENCE
ZR4040-2.5
ISSUE 4 - JANUARY 2003
DEVICE DESCRIPTION
FEATURES
Small outline SOT23 package
The ZR4040-2.5 uses a bandgap circuit
design to achieve a precision micropower
voltage reference of 2.5 volts. The device is
available in a small outline surface mount
package, ideal for applications where space
saving is important, as well as packages for
through hole requirements.
•
•
•
•
•
•
•
•
•
TO92 style package
No stabilising capacitor required
Typical TC 30ppm/°C
Typical slope resistance 0.4Ω
2% 1% and 0.5 % tolerance
Industrial temperature range
Operating current 60µA to 15mA
Transient response, stable in less than
10µs
The ZR4040-2.5 design provides a stable
voltage without an external capacitor and is
stable with capacitive loads. The ZR4040-2.5
is recommended for operation between
60µA and 15mA and so is ideally suited to
low power and battery powered
applications.
APPLICATIONS
Excellent performance is maintained to an
absolute maximum of 25mA, however the
rugged design and 20 volt processing allows
the reference to withstand transient effects
and currents up to 200mA. Superior
switching capability allows the device to
reach stable operating conditions in only a
few microseconds.
Battery powered and portable
•
equipment.
Metering and measurement systems.
•
Instrumentation.
•
Test equipment.
•
Data acquisition systems.
•
Precision power supplies.
•
SCHEMETIC DIAGRAM
V
R
Gnd
4-173