5秒后页面跳转
ZQ3C102-RB-10 PDF预览

ZQ3C102-RB-10

更新时间: 2023-12-06 20:01:45
品牌 Logo 应用领域
SUPERWORLD /
页数 文件大小 规格书
7页 315K
描述
Length (mm): 2.00 | Width (mm): 1.25 | Height (mm): 1.20 | SPQ (reel) : 2000 Multilayer construction, ideal for power lines, general and high-speed signal lines. A closed magnetic route and a high reliability design enable excellent EMI reduction.

ZQ3C102-RB-10 数据手册

 浏览型号ZQ3C102-RB-10的Datasheet PDF文件第1页浏览型号ZQ3C102-RB-10的Datasheet PDF文件第2页浏览型号ZQ3C102-RB-10的Datasheet PDF文件第3页浏览型号ZQ3C102-RB-10的Datasheet PDF文件第5页浏览型号ZQ3C102-RB-10的Datasheet PDF文件第6页浏览型号ZQ3C102-RB-10的Datasheet PDF文件第7页 
P3  
Ferrite Chip Bead ZQ3C Series  
7. Soldering and Mounting:  
Mildly activated rosin fluxes are preferred. Our terminations are suitable for all re-flow soldering systems. If  
hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools.  
Note.  
If wave soldering is used, there will be some risk.  
Re-flow soldering temperatures below 240 degrees, there will be non-wetting risk  
7-1 Solder Re-flow:  
Recommended temperature profiles for re-flow soldering in Figure 1.  
7-2 Soldering Iron (Figure 2):  
Products attachment with soldering iron is discouraged due to the inherent process control limitations. In the  
event that a soldering iron must be employed the following precautions are recommended.  
Note:  
a) Preheat circuit and products to 150°C.  
b) 350°C tip temperature (max)  
c) Never contact the ceramic with the iron tip  
d) 1.0mm tip diameter (max)  
e) Use a 20 watt soldering iron with tip diameter of 1.0mm  
f) Limit soldering time to 4~5 sec.  
Iron Soldering  
PRE-HEATING  
SOLDERING  
NATURAL  
COOLING  
within 4~5s  
350  
150  
Gradual cooling  
Over 60s  
TIME(sec.)  
Figure 2. : Iron Soldering time  
1 times Max.  
Figure 1. : Re-flow Soldering time  
3 times Max.  
7-3 Soldering Volume:  
Accordingly increasing the solder volume, the mechanical stress to product is also increased. Exceeding solder  
volume may cause the failure or mechanical or electrical performance. Solder shall be used not to be exceeding  
as shown in the Figure below. Minimum fillet height = soldering thickness + 25% product height.  
Upper limit  
Recommendable  
t
NOTE: Specifications subject to change without notice. Please check our website for latest information.  
Proprietary and Confidential  
Document of Superworld  
07/10/2019  

与ZQ3C102-RB-10相关器件

型号 品牌 描述 获取价格 数据表
ZQ3C121-RF-10 SUPERWORLD Length (mm): 2.00 | Width (mm): 1.25 | Height (mm): 1.20 | SPQ (reel) : 2000 Multilayer co

获取价格

ZQ3C151-RF-10 SUPERWORLD Length (mm): 2.00 | Width (mm): 1.25 | Height (mm): 1.20 | SPQ (reel) : 2000 Multilayer co

获取价格

ZQ3C221-RD-10 SUPERWORLD Length (mm): 2.00 | Width (mm): 1.25 | Height (mm): 1.20 | SPQ (reel) : 2000 Multilayer co

获取价格

ZQ3C300-RG-10 SUPERWORLD Length (mm): 2.00 | Width (mm): 1.25 | Height (mm): 1.20 | SPQ (reel) : 2000 Multilayer co

获取价格

ZQ3C301-RD-10 SUPERWORLD Length (mm): 2.00 | Width (mm): 1.25 | Height (mm): 1.20 | SPQ (reel) : 2000 Multilayer co

获取价格

ZQ3C471-RD-10 SUPERWORLD Length (mm): 2.00 | Width (mm): 1.25 | Height (mm): 1.20 | SPQ (reel) : 2000 Multilayer co

获取价格