Z80182/Z8L182
Zilog
ZILOG INTELLIGENT PERIPHERAL
P R E L I M I N A R Y
PRELIMINARY PRODUCT SPECIFICATION
Z80182/Z8L182
ZILOG INTELLIGENT PERIPHERAL
CONTROLLER (ZIP™)
FEATURES
■ Z8S180 MPU
■ Two ESCC™ Channels with 32-Bit CRC
■ Three 8-Bit Parallel I/O Ports
- Code Compatible with Zilog Z80®/Z180™ CPU
- Extended Instructions
- Operating Frequency: 33 MHz/5V or 20 MHz/3.3V
- Two DMA Channels
■ 16550 Compatible MIMIC Interface for
- On-Chip Wait State Generators
- Two UART Channels
Direct Connection to PC, XT, AT Bus
- Two 16-Bit Timer Counters
- On-Chip Interrupt Controller
- On-Chip Clock Oscillator/Generator
- Clocked Serial I/O Port
■ 100-Pin Package Styles (QFP, VQFP)
(0.8 Micron CMOS 5120 Technology)
■ Individual WSG for RAMCS and ROMCS
- Fully Static
- Low EMI Option
GENERAL DESCRIPTION
The Z80182/Z8L182 is a smart peripheral controller IC for
modem (in particular V. Fast applications), fax, voice
messaging and other communications applications. It
uses the Z80180 microprocessor (Z8S180 MPU core)
linked with two channels of the industry standard Z85230
ESCC (Enhanced Serial Communications Controller), 24
bitsofparallelI/O,anda16550MIMICfordirectconnection
to the IBM PC, XT, AT bus.
errorcorrectiononoutgoingandincomingdata.Inexternal
applications, three 8-bit parallel ports are available for
drivingLEDsorotherdevices. Figure1showstheZ80182/
Z8L182 block diagram, while the pin assignments for the
QFP and the VQFP packages are shown in Figures 2 and
3, respectively. All references in this document to the
Z80182, or Z182 refer to both the Z80182 and Z8L182.
Notes:
All Signals with a preceding front slash, "/", are active Low, e.g.,
B//W (WORD is active Low); /B/W (BYTE is active Low, only).
The Z80182/Z8L182 allows complete flexibility for both
internal PC and external applications. Also current PC
modem software compatibility can be maintained with the
Z80182/Z8L182 ability to mimic the 16550 UART chip. The
Z80180 acts as an interface between the ESCC™ and
16550 MIMIC interface when used in internal applications,
and between the two ESCC channels in the external
applications. This interface allows data compression and
Power connections follow conventional descriptions below:
Connection
Circuit
Device
Power
Ground
VCC
GND
VDD
VSS
DS971820600
3-1
PS009801-0301