Satellite MuxTee
Z4BT-2R15G+
Bias-Tee/Diplexer
50Ω
10 to 2150MHz (10MHz, 950-2150MHz)
The Big Deal
• Compact L-Band all-in-one DC and Ref-
erence Inject Bias Tee
CASE STYLE: CC1823
• Integrated 10 MHz Diplexer and DC
Bias-Tee
• DC pass through: 2A, 48V
• Low RF Insertion Loss: 0.5 dB Typ. over
950-2150 MHz
Product Overview
The Z4BT-2R15G+ is a combination of bias tee and diplexer designed to support L-Band communications application.
Ideally suited for satellite communication installations, the Z4BT-2R15G+ combines wide band, flat response bias tee
performance with additional functionality to inject 10 MHz reference clock in a single compact design. Built in a rugged
shielded case, the Z4BT-2R15G+ is equipped with SMA Female connectors for all ports.
The Z4BT-2R15G+ is ideally suited for powering Satellite up converters and LNBs where IF, DC and 10 MHz clock
reference are all injected on a single coax cable.
Key Features
Feature
Advantages
Combines the features and capability of two coaxial components into one single compact
assembly. Bias tee + Reference injection to enable remote LNB / BVC installations.
Compact Integration
Allows easy coupling of 10 MHz signals to coax for PLL reference clocks reducing cable runs.
Blocks 10MHz from RF port reducing unwanted 10 MHz leakage.
Filtered 10 MHz Port
Enables remote powering of antenna mounted amplifiers while splitting the RF signal. Eliminates
additional cable runs. Designed to handle up to 2A at 48 Volts, the Z4BT-2R15G+ can also
support a wide variety of remotely powered RF equipment.
DC pass through / DC Feed
Connectors
All connectors are SMA Female.
Can be used at both ends of a feed to inject RF, DC and 10 MHz.
Bi-Directional Operation
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 1 of 4