Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1735-1
Shielded Power Inductors
–
XGL1060
Halogen
Free
• Industry’s lowest DCR and low power losses
• High current handling with soft saturation characteristics
• AEC-Q200 Grade 1 (–40°C to +125°C) with a 165°C max part
temperature
Designer’s Kit C497 contains 3 of each value
Core material Composite
AEC
+
Q200 125°C
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight 3.6 – 4.0 g
Operating voltage: 0 – 60 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
±0°C rise 40°C rise
Inductance2
±±0ꢀ (ꢁµ)
SRF typ4
(Mµz)
Isat (A)5
Part number1
typ
max
10ꢀ drop ±0ꢀ drop 30ꢀ drop
XGL1060-102ME_
XGL1060-152ME_
XGL1060-182ME_
XGL1060-222ME_
XGL1060-272ME_
1.0
1.5
1.8
2.2
2.7
1.7
2.5
2.8
3.8
4.3
2.0
2.8
3.2
4.3
4.9
39
32
28
25
23
19.3
16.5
13.5
12.6
11.4
33.0
28.0
23.5
21.5
19.7
48.0
40.0
35.0
31.0
29.0
29.2
22.8
20.4
18.5
17.1
39.9
31.3
28.2
25.3
23.2
XGL1060-332ME_
XGL1060-472ME_
XGL1060-562ME_
XGL1060-682ME_
XGL1060-822ME_
3.3
4.7
5.6
6.8
8.2
5.0
7.5
8.9
11.0
13.3
5.7
8.5
10.1
12.5
15.0
21
18
16
14
13
10.9
9.1
7.7
7.3
7.1
18.1
15.4
13.4
12.7
11.8
26.0
22.5
19.7
18.4
16.9
16.1
13.4
12.1
10.9
9.9
22.0
18.2
16.4
14.8
13.3
XGL1060-103ME_
10
16.1
18.0
12
6.5
10.9
15.5
9.0
12.1
1. When ordering, please specify termination and packaging codes:
XGL1060-103MEC
Termination: E= RoHS compliant tin-silver over copper.
Special order:T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Packaging: C= 7″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per reel).
Quantities less than full reel available: in tape (not machine ready) or with leader
and trailer ($25 charge).
Temperature rise is highly dependent
on many factors including pcb land
pattern, trace size, and proximity
to other components. Therefore
temperature rise should be verified
in application conditions.
D= 13″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel).
Factory order only, not stocked.
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for
reference only and does not represent absolute maximum ratings. Click for temperature derating
information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1735-1 Revised 08/25/22
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Singapore + 65-6484 8412 sales@coilcraft.com.sg