Document 1754-1
Shielded Power Inductors
–
XGL1712
Halogen
Free
• Industry’s lowest DCR and low power losses
• Wide inductance range up to 82 uH
• High current handling with soft saturation characteristics
• AEC-Q200 (–40°C to +125°C) with 165°C max part temperature
AEC
+
Core material Composite
Q200 125°C
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight 20 – 25 g
Operating voltage: 0 – 60 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
2ꢀ°C rise 4ꢀ°C rise
Inductance2
2ꢀ0 (ꢁµ)
SRF typ4
(Mµz)
Isat (A)5
Part number1
typ
max
1ꢀ0 drop 2ꢀ0 drop 3ꢀ0 drop
XGL1712-102MED
XGL1712-162MED
XGL1712-232MED
XGL1712-332MED
XGL1712-472MED
1.0
1.6
2.3
3.3
4.7
0.9
1.1
1.3
1.6
2.0
1.1
1.3
1.5
1.9
2.3
27
21
17
15
13
40.0
32.0
28.5
23.0
19.9
68.0
54.5
48.0
40.0
35.0
95.0
77.0
69.5
59.0
51.5
40.0
36.0
31.6
30.3
27.2
55.0
50.0
43.5
41.7
37.7
XGL1712-562MED
XGL1712-752MED
XGL1712-103MED
XGL1712-153MED
XGL1712-183MED
5.6
7.5
10
15
18
2.5
3.1
3.8
6.3
6.9
2.8
3.6
4.4
7.2
7.9
12
18.2
16.5
14.3
11.3
10.9
32.0
28.5
24.5
19.7
18.5
47.0
42.0
35.0
29.0
27.0
24.6
22.4
20.3
16.8
15.4
33.9
31.5
27.9
22.7
21.2
9.7
8.4
6.6
6.3
XGL1712-223MED
XGL1712-333MED
XGL1712-473MED
XGL1712-683MED
XGL1712-823MED
22
33
47
68
82
8.8
13.7
18.7
28.2
34.6
9.8
15.2
20.7
31.3
38.4
5.7
5.1
4.1
3.4
2.8
9.8
8.9
7.1
5.6
5.3
16.6
14.6
11.8
9.2
24.0
20.5
16.5
12.8
12.5
14.4
11.3
9.7
8.1
7.1
19.5
15.4
13.3
11.0
9.7
8.8
1. When ordering, please specify termination code:
XGL1712-823MED
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Termination: E= RoHS compliant tin-silver over copper.
Special order:T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: D= 13″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per full reel). Quantities
less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1754-1 Revised 02/17/23
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2023
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.