Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1730-1
Shielded Power Inductors
–
XGL1313
Halogen
Free
• Industry’s lowest DCR and low power losses
• Wide inductance range up to 47 uH
• High current handling with soft saturation characteristics
• AEC-Q200 Grade 1 (–40°C to +125°C) with a 165°C max part
temperature
AEC
Designer’s Kit C518 contains 3 of each value
Core material Composite
+
Q200 125°C
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight 13 – 16 g
Operating voltage: 0 – 60 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
SRF typ4
(Mµz)
Isat (A)5
Part number1
typ
max
120 drop ±20 drop 320 drop
XGL1313-152MED
XGL1313-222MED
XGL1313-332MED
XGL1313-472MED
XGL1313-682MED
1.5
2.2
3.3
4.7
6.8
1.0
1.4
2.0
2.5
3.8
1.2
1.6
2.3
2.8
4.3
30
25
20
16
13
24.5
21.0
18.0
16.0
12.5
39.0
33.5
29.0
25.0
19.5
53.0
46.0
40.0
35.0
26.5
35.4
32.9
28.9
26.7
22.5
48.7
45.1
39.7
36.7
31.0
XGL1313-822MED
XGL1313-103MED
XGL1313-153MED
XGL1313-223MED
XGL1313-333MED
8.2
10
15
22
33
4.4
5.5
8.0
11.6
18.3
5.2
6.3
9.2
13.3
20.7
12
10
8.1
7.1
5.8
11.3
10.5
8.1
7.3
5.6
18.2
17.0
13.0
11.5
8.5
25.0
23.0
17.5
15.4
11.6
20.9
19.0
15.5
12.6
9.3
28.7
26.0
21.3
17.2
12.6
XGL1313-473MED
47
26.5
30.0
5.0
4.7
7.3
9.7
7.1
9.1
1. When ordering, please specify termination code:
XGL1313-473MED
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Termination: E= RoHS compliant tin-silver over copper.
Special order:T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: D= 13″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel). Quantities
less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1730-1 Revised 08/21/23
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2023
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.