Document 1353-1
Shielded Power Inductors
–
XEL6030
• AEC-Q200 Grade 1 qualified
• Extremely low DCR and ultra low AC losses for high switching
frequencies (2 to 5 MHz)
• Superior current handling with soft saturation characteristics;
can withstand high current spikes
Designer’s Kit C466 contains 3 of each value
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight 0.62 – 0.66 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise).
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 400/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.12 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
20°C rise 40°C rise
Inductance2
20ꢀ (ꢁµ)
SRF typ4
(Mµz)
Isat5
(A)
Part number1
typ
max
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
XEL6030-151ME_
XEL6030-281ME_
XEL6030-471ME_
XEL6030-821ME_
XEL6030-102ME_
0.15
0.28
0.47
0.82
1.0
1.35
2.10
3.01
5.09
6.32
1.49
147
97
63
52
43
45.0
38.0
28.0
21.0
18.0
23.6
18.9
15.8
12.1
12.0
33.3
26.7
22.3
16.0
16.0
2.35
3.31
5.60
6.95
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
XEL6030-152ME_
XEL6030-222ME_
XEL6030-332ME_
1.5
2.2
3.3
9.57
12.70
19.92
10.52
13.97
20.81
34
30
26
15.0
13.0
10.5
10.0
7.0
6.0
14.0
10.0
8.0
1. When ordering, please specify termination and packaging codes:
XEL6030-332MEC
Termination: E= RoHS compliant tin-silver (96.5/3.5) over copper.
Special order:T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel).
B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D= 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(1500 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1353-1 Revised 01/13/17
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.