Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1359-1
Shielded Power Inductors
–
XEL6060
Halogen
Free
• AEC-200 Grade 1 (–40°C to +125°C)
• Extremely low DCR and ultra low AC losses for high switching
frequencies (2 to 5 MHz)
• Superior current handling with soft saturation characteristics
• Can withstand high current spikes
AEC
Designer’s Kit C466 contains 3 of each value
Core material Composite
Environment RoHS compliant, halogen free
+
Q200 125°C
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight 1.23 – 1.31 g
Operating voltage 0 – 80 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 250/7″reel; 750/13″ reel Plastic tape: 16 mm wide,
0.4 mm thick, 8 mm pocket spacing, 6.23 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Isat (A)5
Irms (A)6
±0°C rise 40°C rise
Inductance2
±±0ꢀ (ꢁµ)
SRF typ4
(Mµz)
Part number1
typ
max
10ꢀ drop ±0ꢀ drop 30ꢀ drop
XEL6060-331ME_
XEL6060-561ME_
XEL6060-821ME_
XEL6060-102ME_
XEL6060-152ME_
0.33
0.56
0.82
1.0
1.98
2.60
3.03
3.70
4.28
2.20
79.0
59.0
52.0
47.0
41.0
13.0
11.0
10.6
9.8
20.0
17.0
16.6
15.3
14.2
30.0
23.0
20.0
20.0
19.0
23.6
20.6
19.1
17.2
16.0
31.8
27.7
25.7
23.2
21.6
2.90
3.33
4.07
4.71
1.5
9.2
XEL6060-222ME_
XEL6060-272ME_
XEL6060-472ME_
XEL6060-682ME_
XEL6060-822ME_
2.2
2.7
4.7
6.8
8.2
6.10
6.94
13.65
20.82
22.71
6.70
7.63
15.02
22.90
24.98
33.0
26.0
23.0
16.0
15.0
7.6
6.5
5.6
3.6
3.5
11.7
10.0
8.5
5.9
5.7
16.0
13.8
11.4
7.9
13.4
12.6
9.0
7.3
7.0
18.1
17.0
12.1
9.8
7.6
9.4
XEL6060-123ME_
XEL6060-333ME_
12
33
36.66
83.2
40.33
91.50
12.0
7.8
2.7
1.9
4.2
2.8
5.8
3.8
5.5
3.0
7.4
4.1
1. When ordering, please specify termination and packaging codes:
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
XEL6060-333MEC
Termination: E= RoHS compliant tin-silver over copper.
Special order:T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). Quantities less
than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
D= 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(750 parts per full reel).
B= Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating
the need for multiple packaging codes. When ordering, simply change the last letter of your
part number from B to C.
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1359-1 Revised 08/15/23
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2023
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.