Document 1412-1
Shielded Power Inductor XEL5030
• Extremely low DCR and ultra low AC losses for high switching
frequencies (2 to 5 MHz)
• Superior current handling with soft saturation characteristics
• AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
• Can withstand high current spike
Core material Composite
Environment RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight 0.39 – 0.58 g
Ambient temperature –40°C to +125°C with (40°C) Irms current.
Maximum part temperature +165°C (ambient + temp rise).
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 400/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.18 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (µH)
SRF typ4
(MHz)
Isat5
(A)
Irms Testing
Part number1
typ
max
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
XEL5030-131ME_
XEL5030-261ME_
XEL5030-421ME_
XEL5030-601ME_
XEL5030-102ME_
0.13
0.26
0.42
0.60
1.0
1.53
2.16
3.00
4.44
7.00
1.83
187
117
84
64
51
44.0
31.0
23.5
22.0
16.9
25.0
22.5
18.0
15.6
11.4
35.0
30.5
25.0
21.4
15.4
2.60
3.60
5.33
8.40
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should
be verified in application
conditions.
XEL5030-122ME_
XEL5030-152ME_
XEL5030-222ME_
XEL5030-332ME_
XEL5030-472ME_
1.2
1.5
2.2
3.3
4.7
8.80
9.90
13.2
21.2
36.0
10.5
49
45
36
28
23
15.3
15.0
10.5
8.40
6.70
10.4
8.6
7.2
5.9
4.3
14.4
12.2
9.7
8.1
5.9
11.9
14.5
23.3
40.0
1. When ordering, please specify termination and packaging codes:
XEL5232-47±MEC
Termination: E = RoHS compliant tin-silver over copper.
Special order: S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not
stocked (1500 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1412-1 Revised 01/13/18
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
5秒后页面跳转
晶闸管阳极与阴极之间加电压时控制极的电流流动分析
探究MOS管沟道夹断后载流子传输机制及其电路设计影响
光敏电阻的工作原理、作用及检测方法
ENC28J60以太网控制器全面解析：特性、应用、引脚说明
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
