Kintex-7 FPGAs Data Sheet:
DC and AC Switching Characteristics
DS182 (v2.16) May 8, 2017
Product Specification
Introduction
Kintex®-7 FPGAs are available in -3, -2, -1, -1L, and -2L
speed grades, with -3 having the highest performance. The
-2L devices are screened for lower maximum static power
and can operate at lower core voltages for lower dynamic
power than the -2 devices. The -2L industrial (I) temperature
unless otherwise noted, all the DC and AC electrical
parameters are the same for a particular speed grade (that
is, the timing characteristics of a -1 speed grade military
temperature device are the same as for a -1 speed grade
commercial temperature device). However, only selected
speed grades and/or devices are available in each
temperature range.
devices operate only at V
= 0.95V. The -2L extended (E)
CCINT
temperature devices can operate at either V
= 0.9V or
CCINT
1.0V. The -2LE devices when operated at V
the -2LI devices when operated at V
= 1.0V, and
CCINT
All supply voltage and junction temperature specifications
are representative of worst-case conditions. The parameters
included are common to popular designs and typical
applications.
= 0.95V, have the
CCINT
same speed specifications as the -2 speed grade, except
where noted. When the -2LE devices are operated at
V
= 0.9V, the speed specifications, static power, and
CCINT
dynamic power are reduced. The -1L military (M)
temperature devices have the same speed specifications as
the -1 military temperature devices and are screened for
lower maximum static power.
Available device and package combinations can be found in
:
•
•
7 Series FPGAs Overview (DS180)
Defense-Grade 7 Series FPGAs Overview (DS185)
This Kintex-7 FPGA data sheet, part of an overall set of
documentation on the 7 series FPGAs, is available on the
Xilinx website at www.xilinx.com/documentation.
Kintex-7 FPGA DC and AC characteristics are specified in
commercial, extended, industrial, and military temperature
ranges. Except for the operating temperature range or
DC Characteristics
Table 1: Absolute Maximum Ratings
(1)
Symbol
FPGA Logic
VCCINT
Description
Min
Max
Units
Internal supply voltage
Auxiliary supply voltage
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.40
–0.55
–0.40
1.1
2.0
V
V
V
V
V
V
V
V
V
V
VCCAUX
Supply voltage for the block RAM memories
Output drivers supply voltage for HR I/O banks
Output drivers supply voltage for HP I/O banks
Auxiliary supply voltage
1.1
VCCBRAM
3.6
VCCO
2.0
2.06
VCCAUX_IO
VREF
Input reference voltage
2.0
I/O input voltage for HR I/O banks
I/O input voltage for HP I/O banks
VCCO + 0.55
VCCO + 0.55
2.625
(2)(3)(4)
VIN
I/O input voltage (when VCCO = 3.3V) for VREF and differential I/O standards except
TMDS_33(5)
Key memory battery backup supply
–0.5
2.0
V
VCCBATT
© 2011–2017 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Kintex, Artix, Zynq, Spartan, ISE, Vivado and other designated brands included herein are trademarks of Xilinx in the
United States and other countries. All other trademarks are the property of their respective owners.
DS182 (v2.16) May 8, 2017
www.xilinx.com
Product Specification
1