X45620
ABSOLUTE MAXIMUM RATINGS
COMMENT
Temperature under bias ................... -65°C to +135°C
Storage temperature ........................ -65°C to +150°C
Voltage on any pin with
Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device (at these or any other conditions above those
listed in the operational sections of this specification) is
not implied. Exposure to absolute maximum rating con-
ditions for extended periods may affect device reliability.
respect to V ...................................... -1.0V to +6V
SS
D.C. output current
(all output pins except V
).............................5mA
OUT
D.C. output current V
....................................50mA
OUT
Lead temperature (soldering, 10 seconds)........ 300°C
RECOMMENDED OPERATING CONDITIONS
Temperature
Commercial
Industrial
Min
0°C
Max
70°C
Device Option
-2.7
Supply Voltage
2.7V-5.5V
-40°C
+85°C
Blank
4.75V-5.5V
D.C. OPERATING CHARACTERISTICS
(Over recommended operating conditions unless otherwise specified)
Limits
Symbol
Parameter
Min
Typ (6)
Max
Unit
Test Conditions
ICC1
VCC Supply Current (Active)
(Excludes IOUT) Read Memory array
(Excludes IOUT) Write nonvolatile
Memory
mA SCL = 400kHz
VOUT, RESET,
1.5
3.0
LOWLINE = Open
Note 1
ICC2
VCC Supply Current (Passive)
µA
SDA = VCC, Any Input =
VSS or VCC: VOUT
RESET, LOWLINE =
Open, Note 2
,
(Excludes IOUT
)
50
ICC3
VCC Current (Battery Backup Mode)
(Excludes IOUT
1
1
µA
VBATT = 2.8V, VOUT, RE-
SET = Open, Note 4, 1
)
IBATT1
IBATT2
VBATT Current (Excludes IOUT
)
)
µA
µA
VOUT = VCC, Note 4
VBATT Current (Excludes IOUT
(Battery Backup Mode)
50
VOUT = VBATT
,
VBATT = 2.8V
VOUT, RESET = Open,
Note 4
VOUT1
VOUT2
VOLB
Output Voltage (VCC > VBATT + 0.03V or
VCC > VTRIP1
VCC – 0.05
VCC – 0.5
V
CC – 0.02
V
V
IOUT = -5mA
IOUT = -50mA
VCC – 0.2
Output Voltage (VCC < VBATT + 0.03V
and VCC < VTRIP1) {Battery Backup}
VBATT – 0.2
V
IOUT = -250µA
Output (BATT-ON) LOW Voltage
0.4
V
IOL = 3.0mA (5V)
IOL = 1.0mA (3V)
VBSH
Battery Switch Hysteresis
30
-30
mV Power-up
mV Power-down, Note 4
(VCC < VTRIP1
)
VTRIP1
VTRIP2
VCC Reset Trip Point Voltage
4.5
2.55
4.62
2.62
4.75
2.7
V
V
X45620
X45620-2.7
V2MON Reset Trip Point Voltage
2.55
1.7
2.62
1.75
2.7
1.8
X45620
X45620-2.7
FN8250.0
4
July 29, 2005