Approval sheet
TEST & REQUIREMENTS
測試方法
條件
允收標準
Requirements
±(1.0%+0.5mΩ)
Parameter
Conditions
T = +155±2ºC ; t = 1000h
高溫測試
MIL-STD-202 Method 108
High Temp. Exposure
冷熱衝擊測試
-55±3°C to 155±3°C with 30 minute dwell at each
temperature and 1 min maximum transition time.1000
cycles.
Thermal Shock
±(1.0%+0.5mΩ)
JESD22-A-104
-55±3°C至155±3°C, 每個溫度值的停留時間為
30分鐘, 每個溫度之間的切換必須在1分鐘內完成 .進行
1000 個循環
85ºC / 85%RH;10% of operating power,1000h
±(1.0%+0.5mΩ)
偏高湿度測試
Biased Humidity
負載壽命測試
Operational Life
MIL-STD-202 Method 103
35% rated power ; T=125±2ºC ;t= 90minON ,
30min OFF,1000h
±(1.0%+0.5mΩ)
MIL-STD-202 Method 108
可焊性測試
浸入錫爐/ Dip into solder at T = 245±5ºC ,t = 3±1sec. 錫 涵蓋 面 積/The coveredarea
>95%
Solderability
J-STD-002
±(1.0%+0.5mΩ)
抗焊接热測試
Condition B,260±5ºC
MIL-STD-202 Method 210
Condition B
Resistance to Solder Heat
±(1.0%+0.5mΩ)
機械衝擊測試
加速度a =100G , 振幅時間t = 6 msa =100G , t = 6 ms
MIL-STD-202 Method 213
Condition C
Mechanical Shock
±(1.0%+0.5mΩ)AEC Q200-005
基板彎曲測試
兩支撐點間距 / Span between fulcrums
Substrate Bending
:90mm ; 振幅 / Bend Width:2mm ; 时间
/Time:60s 測試板/Test board:玻璃纖維板/Glass-
Epoxy Board ; 厚度/Thickness=1.6mm
Add Aqueous wash chemical-OKEM Clean or
Without mechanical damage and
溶剂抵抗
equivalent, at normal temperature 300 sec in isopropyl. distinct damage in appearance
Resistance to Solvents
MIL-STD-202 Method 215
5g’s for 20 min.,12 cycles each of 3 orientation
Test from 10-2000Hz.
±(1.0%+0.5mΩ)
振动测试
MIL-STD-202 Method 204
Vibration
±1.0%
静电放电
Subjected to ESD pulses at 22℃±5ºC.
Force of 1.8kg for 60 Second.
UL94 V-0 or V-1
AEC Q200-002
ESD
±(1.0%+0.5mΩ)AEC Q200-006
推力测试
Terminal Strength
UL94
可燃性
Flammability
Page 6 of 7
ASC_WWxxD_J_AUTO_V05
Dec - 2023