RELIABILITY PERFORMANCE
No.
1
Item
Test condition
Requirements
High
1000 hrs. at rated operating temperature (e.g. 125°C part
can be stored for 1000 hrs. @ 125°C. Same applies fo r
105°C and 85°C. Unpowered.
Measurement at 24±4 hours after test conclusion.
1000 cycles (-40°C to +125°C). Note: If 85°C part o r
105°C part the 1000 cycles will be at that temperat ure.
Measurement at 24±4 hours after test conclusion. 30min
maximum dwell time at each temperature extreme. 1 min.
maximum transition time.
Temperature
Exposure
(Storage)
MIL-STD-202 Method 108
Temperature
Cycle
JESD22
Method JA-104
2
1000 hours 85°C/85%RH. Unpowered.
Biased Humidity
Operation Life
MIL-STD-202 Method 103
MIL-PRF-27
3
4
Measurement at 24±4 hours after test conclusion.
1000 hrs. @ 105°C. If 85°C or 125°C part will be te sted at
that temperature.
Measurement at 24±4 hours after test conclusion.
Method 213. Condition C,
Peak Value: 100g’s, Duration: 6ms, Waveform: Half-sine
Velocity Change: 12.3ft/sec
Mechanical
Shock
MIL-STD-202 Method 213
MIL-STD-202 Method 204
MIL-STD-202 Method 210
5
6
5g's for 20 minutes, 12 cycles each of 3 orientations.
Note: Use 8"X5" PCB, .031" thick, 7 secure points on one
long side and 2 secure points at corners of opposite sides.
Parts mounted within 2" from any secure point. Test from
10-2000 Hz.
Condition B No pre-heat of samples. Note: Single Wave
Solder - Procedure 2 for SMD and Procedure 1 for Leaded
with solder within 1.5mm of device body.
Vibration
Resistance to
Solder Heat
7
8
Passive Component Human Body Model (HBM)
Electrostatic Discharge (ESD) Test.
Only direct contact discharge, record the voltage value
what the sample can pass.
AEC-Q200-002
Or
ISO/DIS10605
ESD
For both Leaded & SMD. Electrical Test not required.
Magnification 50X. Conditions:
Leaded: Method A @ 235°C, category 3. SMD:
a) Method B, 4 hrs @ 155°C dry heat @ 235°C
b) Method B @ 215°C category 3.
Solderability
J-STD-002
UL-94
9
c) Method D category 3 @ 260°C.
Flammability
Board Flex
V-0 or V-1 Acceptable
10
60 sec minimum holding time.
Force of 900g for 60 seconds.
AEC-Q200-005
AEC-Q200-006
11
12
Terminal Strength
(SMD)
Page 5 of 7
ASC_WQCW1608 Series_Auto
Nov. 2018