Datasheet > VX-014K-2C23

VX-014K-2C23

更新时间： 2024-02-23 17:05:32

品牌	Logo	应用领域
欧姆龙 - OMRON		开关
页数	文件大小	规格书
7页	1818K
描述
Snap Acting/Limit Switch

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

VX-014K-2C23 技术参数

是否Rohs认证：	符合	生命周期：	Active
Reach Compliance Code：	unknown	风险等级：	5.72
开关类型：	SNAP ACTING/LIMIT SWITCH	Base Number Matches：	1

VX-014K-2C23 数据手册

Miniature Basic Switch

Precautions

★Please refer to "Common Precautions" for correct use.

Cautions

Correct Use

●Handling

●Mounting

Do not apply excessive shock. Doing so may cause damage to

the Switch's internal components because it is designed for a

small load.

Use M3 mounting screw with plane washers or spring washers to

securely mount the Switch. Tighten the screws to a torque of

0.39 to 0.59 N·m {4 to 6 kgf·cm}.

●Soldering

●Mounting Direction

• Terminal connections

For a Switch with an actuator, mount the Switch in a direction

where the actuator weight will not be applied to the Switch.

Since the Switch is designed for a small load, its resetting force

is small. Therefore, resetting failure may occur if unnecessary

load is applied to the Switch.

Complete the soldering at the iron tip temperature between

250 to 350°C (60W) within 5 seconds, and do not apply any

external force for 1 minute after soldering.

Apply minimum amount of flux required. It may result in

contact failure once the flux penetrates into the internal part of

the Switch.

●Using Micro Loads

Using a model for ordinary loads to open or close the contact of

a micro load circuit may result in faulty contact. Use models that

operate in the following range. However, even when using micro

load models within the following operating range, if inrush

current occurs when the contact is opened or closed, it may

increase the contact wear and so decrease durability. Therefore,

insert a contact protection circuit where necessary. The N-level

reference value applies for the minimum applicable load. This

value indicates the malfunction reference level for the reliability

level of 60% (λ⁶⁰).

• Connecting to Tab Terminals (#187)

When connecting to the Tab terminal, insert the receptacle of

tab #187 straight toward the terminal.

Applying excessive external force laterally may cause

deformation of terminals and may damage the housings.

(JIS C5003)

The equation, λ⁶⁰=0.5×10^-6/operations operation, indicates that

the estimated malfunction rate is less than

with a reliability level of 60%.

operations

2,000,000

0.16 mA

26 mA 100 mA

Operating

range for

general-load

model

Operating range for

micro-load model

VX-01

VX-5

1 mA

100 mA 160 mA

0.1

100

1,000

Current (mA)

1...3 4 567

下载PDF

与VX-014K-2C23相关器件

型号	品牌	描述	获取价格	数据表
VX-014K-3A3	OMRON	Snap Acting/Limit Switch	获取价格
VX-014K-3C23	OMRON	Snap Acting/Limit Switch	获取价格
VX-015-1A3	OMRON	Snap Action Switch	获取价格
VX-015-1C23	OMRON	Snap Action Switch	获取价格
VX-015-2A3	OMRON	Snap Acting/Limit Switch	获取价格
VX-015-2C23	OMRON	Snap Acting/Limit Switch	获取价格