5秒后页面跳转
捷配首页

Datasheet > UPD780306YGF-XXX-3BA-A
UPD780306YGF-XXX-3BA-A PDF预览

UPD780306YGF-XXX-3BA-A

更新时间： 2024-01-12 14:54:23
品牌 Logo 应用领域
瑞萨 - RENESAS 时钟微控制器光电二极管外围集成电路
页数 文件大小 规格书
558页 2782K
描述
8-BIT, MROM, 5MHz, MICROCONTROLLER, PQFP100, 14 X 20 MM, LEAD FREE, PLASTIC, QFP-100

阅读下载

获取价格

UPD780306YGF-XXX-3BA-A 技术参数

是否Rohs认证： 符合生命周期：Active
零件包装代码：QFP包装说明：14 X 20 MM, LEAD FREE, PLASTIC, QFP-100
针数：100Reach Compliance Code：compliant
HTS代码：8542.31.00.01风险等级：5.77
具有ADC：YES地址总线宽度：
位大小：8CPU系列：UPD78K0
最大时钟频率：5 MHzDAC 通道：NO
DMA 通道：NO外部数据总线宽度：
JESD-30 代码：R-PQFP-G100长度：20 mm
I/O 线路数量：57端子数量：100
最高工作温度：85 °C最低工作温度：-40 °C
PWM 通道：YES封装主体材料：PLASTIC/EPOXY
封装代码：QFP封装等效代码：QFP100,.7X.9
封装形状：RECTANGULAR封装形式：FLATPACK
电源：2/5.5 V认证状态：Not Qualified
RAM（字节）：1024ROM（单词）：49152
ROM可编程性：MROM座面最大高度：3 mm
速度：5 MHz子类别：Microcontrollers
最大压摆率：19.5 mA最大供电电压：5.5 V
最小供电电压：2 V标称供电电压：2.2 V
表面贴装：YES技术：CMOS
温度等级：INDUSTRIAL端子形式：GULL WING
端子节距：0.65 mm端子位置：QUAD
宽度：14 mmuPs/uCs/外围集成电路类型：MICROCONTROLLER
Base Number Matches：1

UPD780306YGF-XXX-3BA-A 数据手册

 浏览型号UPD780306YGF-XXX-3BA-A的Datasheet PDF文件第2页浏览型号UPD780306YGF-XXX-3BA-A的Datasheet PDF文件第3页浏览型号UPD780306YGF-XXX-3BA-A的Datasheet PDF文件第4页浏览型号UPD780306YGF-XXX-3BA-A的Datasheet PDF文件第6页浏览型号UPD780306YGF-XXX-3BA-A的Datasheet PDF文件第7页浏览型号UPD780306YGF-XXX-3BA-A的Datasheet PDF文件第8页 
NOTES FOR CMOS DEVICES  
1
VOLTAGE APPLICATION WAVEFORM AT INPUT PIN  
Waveform distortion due to input noise or a reflected wave may cause malfunction. If the input of the  
CMOS device stays in the area between VIL (MAX) and VIH (MIN) due to noise, etc., the device may  
malfunction. Take care to prevent chattering noise from entering the device when the input level is fixed,  
and also in the transition period when the input level passes through the area between VIL (MAX) and  
V
IH (MIN).  
HANDLING OF UNUSED INPUT PINS  
2
Unconnected CMOS device inputs can be cause of malfunction. If an input pin is unconnected, it is  
possible that an internal input level may be generated due to noise, etc., causing malfunction. CMOS  
devices behave differently than Bipolar or NMOS devices. Input levels of CMOS devices must be fixed  
high or low by using pull-up or pull-down circuitry. Each unused pin should be connected to VDD or GND  
via a resistor if there is a possibility that it will be an output pin. All handling related to unused pins must  
be judged separately for each device and according to related specifications governing the device.  
3
PRECAUTION AGAINST ESD  
A strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and  
ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as  
much as possible, and quickly dissipate it when it has occurred. Environmental control must be  
adequate. When it is dry, a humidifier should be used. It is recommended to avoid using insulators that  
easily build up static electricity. Semiconductor devices must be stored and transported in an anti-static  
container, static shielding bag or conductive material. All test and measurement tools including work  
benches and floors should be grounded. The operator should be grounded using a wrist strap.  
Semiconductor devices must not be touched with bare hands. Similar precautions need to be taken for  
PW boards with mounted semiconductor devices.  
4
STATUS BEFORE INITIALIZATION  
Power-on does not necessarily define the initial status of a MOS device. Immediately after the power  
source is turned ON, devices with reset functions have not yet been initialized. Hence, power-on does  
not guarantee output pin levels, I/O settings or contents of registers. A device is not initialized until the  
reset signal is received. A reset operation must be executed immediately after power-on for devices  
with reset functions.  
5
POWER ON/OFF SEQUENCE  
In the case of a device that uses different power supplies for the internal operation and external  
interface, as a rule, switch on the external power supply after switching on the internal power supply.  
When switching the power supply off, as a rule, switch off the external power supply and then the  
internal power supply. Use of the reverse power on/off sequences may result in the application of an  
overvoltage to the internal elements of the device, causing malfunction and degradation of internal  
elements due to the passage of an abnormal current.  
The correct power on/off sequence must be judged separately for each device and according to related  
specifications governing the device.  
6
INPUT OF SIGNAL DURING POWER OFF STATE  
Do not input signals or an I/O pull-up power supply while the device is not powered. The current  
injection that results from input of such a signal or I/O pull-up power supply may cause malfunction and  
the abnormal current that passes in the device at this time may cause degradation of internal elements.  
Input of signals during the power off state must be judged separately for each device and according to  
related specifications governing the device.  
User’s Manual U11377EJ3V0UD  
3
12345678...558

下载PDF

与UPD780306YGF-XXX-3BA-A相关器件

型号 品牌 描述 获取价格 数据表
UPD780308 NEC 8-bit Single-Chip Microcontroller

获取价格
UPD780308 RENESAS 8-BIT SINGLE-CHIP MICROCONTROLLER

获取价格
UPD780308GC-A43-8EU-A RENESAS 8-BIT, MROM, 5MHz, MICROCONTROLLER, PQFP100, 14 X 14 MM, LEAD FREE, PLASTIC, LQFP-100

获取价格
UPD780308GC-XXX-8EU NEC 8-BIT, MROM, 5MHz, MICROCONTROLLER, PQFP100, 14 X 14 MM, FINE PITCH, PLASTIC, LQFP-100

获取价格
UPD780308GF(A)-XXX-3BA-A RENESAS UPD780308GF(A)-XXX-3BA-A

获取价格
UPD780308GF-XXX-3BA NEC 8-BIT, MROM, 5MHz, MICROCONTROLLER, PQFP100, 14 X 20 MM, PLASTIC, QFP-100

获取价格

与UPD780306YGF-XXX-3BA-A相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证