SMD Transient Voltage Suppressor
TV06B5V0-G Thru. TV06B441-G
Working Peak Reverse voltage: 5.0 ~ 440Volts
Power Dissipation: 600 Watts
RoHS Device
Features
SMB/DO-214AA
-Ideally for surface mount applications.
-Easy pick and place.
-Plastic package has Underwriters Lab.
flammability classification 94V-0.
0.155(3.94)
0.130(3.30)
0.087(2.20)
0.077(1.96)
-Typical IR less than 1μA above 10V.
0.191(4.85)
0.171(4.35)
-Fast response time: typically less than 1nS for
uni-direction, less than 5nS for bi-directional,
form 0V to BV min.
0.012(0.30)
0.006(0.15)
0.096(2.44)
0.083(2.13)
Mechanical Data
-Case: JEDEC DO-214AA molded plastic.
0.008(0.20)
0.001(0.02)
0.060(1.52)
0.030(0.75)
-Terminals: solderable per MIL-STD-750,
method 2026
0.216(5.50)
0.201(5.10)
-Polarity: Cathode band denoted.
-Weight: 0.093 gram approx.
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Rating at 25 OC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristics
Symbol
PPPM
Value
600
Units
W
Peak power dissipation on 10/1000μS
waveform (Note 1, Fig.1)
Peak pulse current on 10/1000μS waveform
(Note 1, Fig.3)
IPPM
See Next Table
A
Steady state power dissipation at TL=75
(Note 2)
OC
PM(AV)
IFSM
VF
5.0
100
W
A
Peak forward surge current, 8.3mS single half
sine-wave superimposed on rated load, uni-
directional only (Note 3)
Maximum instantaneous forward voltage at
35.0A for uni-directional only (Note 3, 4)
3.5/5.0
V
OC
OC
Maximum operation junction temperature
Storage temperature range
TJ
150
TSTG
-55 to +150
Note:
1. Non-repetitive current pulse, per Fig. 5 and derated above TA=25 OC per Fig.1
2. Measured on 8.3 mS single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum.
3. VF<3.5V for devices of VBR <200V and VF <5.0V for devices of VBR >201V
REV:C
Page 1
QW-BTV02