TQP9309
High Efficiency 0.5W Small Cell Power Amplifier
Applications
• Small-Cell Basestations
• Enterprise Femtocell
• Bands 5, 6, 8, 12, 13, 14, 17, 20, 26, 27, 28, 29
3.5x4.5 mm Leadless SMT Package
Functional Block Diagram
Product Features
• Frequency Range : 0.7-1.0 GHz
• Covers multiple bands with one component
• Fully integrated, 2-stage Power Amplifier
• Internally matched 50 Ω input/output
• -50dBc ACLR (corrected) @ +28 dBm Pavg
• 32 dB Gain
• 27% PAE @ +28 dBm Pavg
• In-built Control Bias and Temp. Comp Circuit
• Single Supply Voltage : 5V
• Lead-free / RoHS compliant
• POE Capable
General Description
Pin Configuration
The TQP9309 is a high-efficiency two-stage power
amplifier in a low-cost surface-mount package with on-
chip bias control and temperature compensation
circuitry, suitable for small cell base station applications.
Pin No.
1
Label
Vbias
Vcc
2
GND or NC
RFout
3, 4, 5, 6, 8, 9, 10
TQP9309 provides 32 dB gain and >+28 dBm linear
power with pre-distortion correction over the 0.7-1.0 GHz
frequency range for Bands 5, 6, 8, 12, 13, 14, 17, 20, 26,
27, 28, and 29. With pre-distortion, the amplifier is able
to achieve -50dBc ACLR at 28 dBm output power using
a 20 MHz LTE signal.
7
Vpd2
11
Vpd1
12
RFin
13
Backside Paddle
RF/DC Ground
The TQP9309 integrates two high performance amplifier
stages onto a module to allow for a compact system
design and requires very few external components for
operation. The amplifier is bias adjustable allowing the
amplifier’s power consumption to be optimized. The
TQP9309 is available in a lead-free/RoHS-compliant
3.5x4.5mm surface mount package and is pin-
compatible to the 1.8-2.2 GHz TQP9321 and 2.5-2.7
GHz TQP9326.
Ordering Information
Part No.
TQP9309
Description
0.7-1.0 GHz Power Amplifier
TQP9309-PCB
Evaluation board
Standard T/R size: 2500 pcs. on a 13” reel
Datasheet: Rev D 01-30-15
Disclaimer: Subject to change
- 1 of 8 -
© 2015 TriQuint
www.triquint.com