TPS62825, TPS62826, TPS62827, TPS62825A, TPS62826A
TPS62825, TPS62826, TPS62827, TPS62825A, TPS62826A
www.ti.com
SLVSEF9D – MARCH 2018 – REVISED OCTOBER 2020
SLVSEF9D – MARCH 2018 – REVISED OCTOBER 2020
TPS6282x 2.4-V to 5.5-V Input, 1-, 2-, 3-, 4-A Step-down Converter with 1% Output
Accuracy in 1.5-mm × 1.5-mm QFN Package
1 Features
3 Description
•
Available as an integrated-inductor power module:
TPSM82821 and TPSM82822
DCS-Control™ topology
1% feedback or output voltage accuracy (full
temperature range)
Up to 97% efficiency
26-mΩ and 25-mΩ internal power MOSFETs
2.4-V to 5.5-V input voltage range
4-μA operating quiescent current
2.2-MHz switching frequency
Adjustable output voltage from 0.6 V to 4 V
Power save mode for light load efficiency
100% duty cycle for lowest dropout
Active output discharge
Power good output
Thermal shutdown protection
Hiccup short-circuit protection
A forced-PWM version for CCM operation
Create a custom design using the TPS6282x with
the WEBENCH® Power Designer
The TPS6282x is an easy-to-use synchronous step-
down DC-DC converters family with a very low
quiescent current of only 4 μA. Based on the DCS-
Control topology, it provides a fast transient response.
The internal reference allows to regulate the output
voltage down to 0.6 V with a high feedback voltage
accuracy of 1% over the junction temperature range
of –40°C to 125°C. The family devices are pin-to-pin
and BOM-to-BOM compatible. The entire solution
requires a small 470-nH inductor, a single 4.7-µF
input capacitor and two 10-µF or single 22-µF output
capacitor.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The TPS6282x is available in two flavors. The first
includes an automatically entered power save mode
to maintain high efficiency down to very light loads for
extending the system battery run-time. The second
runs in forced-PWM maintaining
a
continuous
conduction mode to ensure the least ripple in the
output voltage and a quasi-fixed switching frequency.
The device features a Power Good signal and an
internal soft start circuit. It is able to operate in 100%
mode. For fault protection, it incorporates a HICCUP
short circuit protection as well as a thermal shutdown.
The device is available in a 6-pin 1.5 x 1.5-mm QFN
package, offering the highest power density solution.
2 Applications
•
•
•
•
•
•
Solid state drive
Portable electronics
Analog security and IP network cameras
Industrial PC
Multifunction printers
Generic point of load
Device Information
PART NUMBER
TPS62824A
TPS62825x
PACKAGE(1)
BODY SIZE (NOM)
6-Pin VSON-HR
1.5 mm x 1.5 mm
TPS62826x
TPS62827
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
100
95
90
85
80
75
70
65
60
55
50
Vout=3.3V
Vout=2.5V
Vout=1.8V
Vout=1.2V
Vout=0.6V
100m
1m
10m
Load (A)
100m
1
4
Efficiency at VIN = 5 V
Typical Application Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1
DATA.
Product Folder Links: TPS62825 TPS62826 TPS62827 TPS62825A TPS62826A