TOSHIBA
TLCS-900 Series
TMP96C041AF
CMOS 16-bit Microcontrollers
TMP96C041AF
1. Outline and Device Characteristics
The TMP96C041AF are high-speed advanced 16-bit micro-
controllers developed for controlling medium to large-scale
equipment. The TMP96C041AF has the improved bus release
function, serial interface and RAMless for TMP96C141AF. Oth-
erwise, the devices function in the same way.
The TMP96C041AF is housed in an 80-pin flat package
and is pin compatible with TMP96C141F except the P92
(CTS0/SCLK0). Device characteristics are as follows:
(4) External memory expansion
• Can be expanded up to 16M bytes (for both programs and
data).
• Can mix 8- and 16-bit external data buses.
(5) 8-bit timers: 2 channels
(6) 8-bit PWM timers: 2 channels
(7) 16-bit timers: 2 channels
(8) Pattern generators: 4 bits, 2 channels
(9) Serial interface: 2 channels
(10) 10-bit A/D converter: 4 channels
(11) Watchdog timer
(1) Original 16-bit CPU
• TLCS-90 instruction mnemonic upward compatible.
• 16M-byte linear address space
• General-purpose registers and register bank system
• 16-bit multiplication/division and bit transfer/arithmetic
instructions
(12) Chip select/wait controller: 3 blocks
(13) Interrupt functions
… …
• 3 CPU interrupts
SWI instruction, privileged violation,
and Illegal instruction
• High-speed micro DMA
- 4 channels (1.6µs/2 bytes @ 20MHz)
• 14 internal interrupts
• 6 external interrupts
7-level priority can be set.
(2) Minimum instruction execution time
- 200ns @ 20MHz
(14) I/O ports
- 47pins
(3) Internal RAM: None
Internal ROM: None
(15) Standby function : 3 halt modes (RUN, IDLE, STOP)
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-
ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
1/20