TMC2005-JT
ARCNET 5 Port
HUB Controller
Data Brief
PRODUCT FEATURES
ARCNET HUB Circuit for ARCNET Protocol (Data
Rate From 156.25Kbps to 10Mbps)
Can Connect with HYC9088 in Normal Mode
Can Connect with RS485 Transceiver,
HYC5000/4000/2000, Opt Module and TTL Interface
in Backplane Mode
Able to Connect Various Transceivers Directly
Device Includes TX/RX Timing Circuit for 5 Port Hub
and Direction Control Circuit, Jitter Correct Circuit
and Noise Cancel Circuit
Supports both Normal and Backplane Mode at the
Same Time for Media Conversion
Easy to Design 8 or 12 Port Hub
+ 5V Single Power
General Description
When configuring a network, the maximum number of nodes and the maximum cable length are limited
by the electric capacity of the transceiver. In this case, the network is expanded by an equipment called
a “HUB” or “repeater”. It maybe necessary to have a converter between coax, T/P and the fiber cable.
It is easy to design a HUB or a repeater because the TMC2005 has various features for expanding
such network.
It can connect with HYC9088, RS485 transceiver, HYC5000/4000/2000 and TTL interface for optical
module. It can connect with three different transceivers at the same time and convert the media of
each. (The data rate cannot be converted. It is necessary to operate all nodes in the same network at
the same data rate). The Hubs can be expanded by connecting two or more TMC2005 chips. By
setting one of 5 ports to open-drain output, the Hub can be expanded to either 12 or 16 ports.
SMSC TMC2005-JT
PRODUCT PREVIEW
Revision 1.0 (07-24-07)